Hexadecimal
Numeral systems by culture 


Positional systems by base 
Decimal (10) 
Nonstandard positional numeral systems 
List of numeral systems 
Template:Navbar 
In mathematics and computing, hexadecimal (also base 16, or hex) is a positional numeral system with a radix, or base, of 16. It uses sixteen distinct symbols, most often the symbols 0–9 to represent values zero to nine, and A, B, C, D, E, F (or alternatively a–f) to represent values ten to fifteen. Hexadecimal numerals are widely used by computer systems designers and programmers. Several different notations are used to represent hexadecimal constants in computing languages; the prefix "0x" is widespread due to its use in Unix and C (and related operating systems and languages). Alternatively, some authors denote hexadecimal values using a suffix or subscript. For example, one could write 0x2AF3 or 2AF3_{16}, depending on the choice of notation.
As an example, the hexadecimal number 2AF3_{16} can be converted to an equivalent decimal representation. Observe that 2AF3_{16} is equal to a sum of (2000_{16} + A00_{16} + F0_{16} + 3_{16}), by decomposing the numeral into a series of place value terms. Converting each term to decimal, one can further write: (2_{16} × 16^{3}) + (A_{16} × 16^{2}) + (F_{16} × 16^{1}) + (3_{16} × 16^{0}),
(2 × 4096) + (10 × 256) + (15 × 16) + (3 × 1), or 10995.
Each hexadecimal digit represents four binary digits (bits), and the primary use of hexadecimal notation is a humanfriendly representation of binarycoded values in computing and digital electronics. One hexadecimal digit represents a nibble, which is half of an octet or byte (8 bits). For example, byte values can range from 0 to 255 (decimal), but may be more conveniently represented as two hexadecimal digits in the range 00 to FF. Hexadecimal is also commonly used to represent computer memory addresses.
Contents
Representation
Written representation
Using 0–9 and A–F
Template:Hexadecimal table In situations where there is no context, hexadecimal numbers can be ambiguous and confused with numbers expressed in other bases. There are several conventions for expressing values unambiguously. A numerical subscript (itself written in decimal) can give the base explicitly: 159_{10} is decimal 159; 159_{16} is hexadecimal 159, which is equal to 345_{10}. Some authors prefer a text subscript, such as 159_{decimal} and 159_{hex}, or 159_{d} and 159_{h}.
In linear text systems, such as those used in most computer programming environments, a variety of methods have arisen:
 In URIs (including URLs), character codes are written as hexadecimal pairs prefixed with
%
:http://www.example.com/name%20with%20spaces
where%20
is the space (blank) character (code value 20 in hex, 32 in decimal).  In XML and XHTML, characters can be expressed as hexadecimal numeric character references using the notation
ode;
, where code is the 1 to 6digit hex number assigned to the character in the Unicode standard. Thus’
represents the right single quotation mark (’) (Unicode value 2019 in hex, 8217 in decimal).^{[1]}  Color references in HTML and CSS and X Window can be expressed with six hexadecimal digits (two each for the red, green, and blue components, in that order) prefixed with
#
: white, for example, is represented#FFFFFF
.^{[2]} CSS allows 3hexdigit abbreviations with one hexdigit per component: #FA3 abbreviates #FFAA33 (a golden orange: Template:Color box).  {{safesubst:#invoke:anchormain}}*nix (Unix and related) shells, AT&T assembly language, and likewise the C programming language, which was designed for Unix (and the syntactic descendants of C – including C++, C#, Java, JavaScript, Python and Windows PowerShell) use the prefix
0x
for numeric constants represented in hex:0x5A3
. Character and string constants may express character codes in hexadecimal with the prefix\x
followed by two hex digits:'\x1B'
represents the Esc control character;"\x1B[0m\x1B[25;1H"
is a string containing 11 characters (plus a trailing NUL to mark the end of the string) with two embedded Esc characters.^{[3]} To output an integer as hexadecimal with the printf function family, the format conversion code%X
or%x
is used.  In the Unicode standard, a character value is represented with
U+
followed by the hex value:U+20AC
is the Euro sign (€).  In MIME (email extensions) quotedprintable encoding, characters that cannot be represented as literal ASCII characters are represented by their codes as two hexadecimal digits (in ASCII) prefixed by an equal to sign
=
, as inEspa=F1a
to send "España" (Spain). (Hexadecimal F1, equal to decimal 241, is the code number for the lower case n with tilde in the ISO/IEC 88591 character set.)  In Intelderived assembly languages, hexadecimal is denoted with a suffixed H or h:
FFh
or05A3H
. Some implementations require a leading zero when the first hexadecimal digit character is not a decimal digit, so one would write0FFh
instead ofFFh
 Other assembly languages (6502, Motorola), Pascal, Delphi, some versions of BASIC (Commodore), Game Maker Language, Godot, GDScript, and Forth use
$
as a prefix:$5A3
.  Some assembly languages (Microchip) use the notation
H'ABCD'
(for ABCD_{16}).  Ada and VHDL enclose hexadecimal numerals in based "numeric quotes":
16#5A3#
. For bit vector constants VHDL uses the notationx"5A3"
.^{[4]}  Verilog represents hexadecimal constants in the form
8'hFF
, where 8 is the number of bits in the value and FF is the hexadecimal constant.  Modula2 and some other languages use # as a prefix:
#05A3
 The Smalltalk language uses the prefix
16r
:16r5A3
 PostScript and the Bourne shell and its derivatives denote hex with prefix
16#
:16#5A3
. For PostScript, binary data (such as image pixels) can be expressed as unprefixed consecutive hexadecimal pairs:AA213FD51B3801043FBC
...  In early systems when a Macintosh crashed, one or two lines of hexadecimal code would be displayed under the Sad Mac to tell the user what went wrong.
 Common Lisp uses the prefixes
#x
and#16r
.  MSX BASIC,^{[5]} QuickBASIC, FreeBASIC and Visual Basic prefix hexadecimal numbers with
&H
:&H5A3
 BBC BASIC and Locomotive BASIC use
&
for hex.^{[6]}  TI89 and 92 series uses a
0h
prefix:0h5A3
 The most common format for hexadecimal on IBM mainframes (zSeries) and midrange computers (IBM System i) running the traditional OS's (zOS, zVSE, zVM, TPF, IBM i) is
X'5A3'
, and is used in Assembler, PL/I, COBOL, JCL, scripts, commands and other places. This format was common on other (and now obsolete) IBM systems as well. Occasionally quotation marks were used instead of apostrophes.  Donald Knuth introduced the use of a particular typeface to represent a particular radix in his book The TeXbook.^{[7]} Hexadecimal representations are written there in a typewriter typeface: 5A3
 Any IPv6 address can be written as eight groups of four hexadecimal digits, where each group is separated by a colon (
:
). This, for example, is a valid IPv6 address: 2001:0db8:85a3:0000:0000:8a2e:0370:7334; this can be abbreviated as 2001:db8:85a3::8a2e:370:7334.  ALGOL 68 uses the prefix
16r
to denote hexadecimal numbers:16r5a3
. Binary, quaternary (base4) and octal numbers can be specified similarly.
There is no universal convention to use lowercase or uppercase for the letter digits, and each is prevalent or preferred in particular environments by community standards or convention.
Early written representations
The choice of the letters A through F to represent the digits above nine was not universal in the early history of computers.
 During the 1950s, some installations favored using the digits 0 through 5 with a macron character ("¯") to denote the values 10–15.
 Bendix G15 computers used the letters U through Z.
 The Librascope LGP30 used the letters F, G, J, K, Q and W.^{[8]}
 The ILLIAC I computer used the letters K, S, N, J, F and L.^{[9]}
 Bruce Alan Martin of Brookhaven National Laboratory considered the choice of A–F "ridiculous" and in a 1968 letter to the editor of the CACM proposed an entirely new set of symbols based on the bit locations, which did not gain much acceptance.^{[10]}
 Soviet programmable calculators Б334 and similar used the symbols "−", "L", "C", "Г", "E", " " (space) on their displays.
Verbal and digital representations
There are no traditional numerals to represent the quantities from ten to fifteen — letters are used as a substitute — and most European languages lack nondecimal names for the numerals above ten. Even though English has names for several nondecimal powers (pair for the first binary power, score for the first vigesimal power, dozen, gross, and great gross for the first three duodecimal powers), no English name describes the hexadecimal powers (decimal 16, 256, 4096, 65536, ... ). Some people read hexadecimal numbers digit by digit like a phone number: 4DA is "fourdeeay". However, the letter A sounds like "eight", C sounds like "three", and D can easily be mistaken for the "ty" suffix: Is it 4D or forty? Other people avoid confusion by using the NATO phonetic alphabet: 4DA is "fourdeltaalfa", the Joint Army/Navy Phonetic Alphabet ("fourdogable"), or a similar ad hoc system.
Systems of counting on digits have been devised for both binary and hexadecimal. Arthur C. Clarke suggested using each finger as an on/off bit, allowing finger counting from zero to 1023_{10} on ten fingers. Another system for counting up to FF_{16} (255_{10}) is illustrated on the right.
Signs
The hexadecimal system can express negative numbers the same way as in decimal: −2A to represent −42_{10} and so on.
However, someTemplate:Who prefer instead to use the hexadecimal notation to express the exact bit patterns used in the processor, so a sequence of hexadecimal digits may represent a signed or even a floating point value. This way, the negative number −42_{10} can be written as FFFF FFD6 in a 32bit CPU register (in two'scomplement), as C228 0000 in a 32bit FPU register or C045 0000 0000 0000 in a 64bit FPU register (in the IEEE floatingpoint standard).
Hexadecimal exponential notation
Just as decimal numbers can be represented in exponential notation so too can hexadecimal. By convention, the letter p represents times two raised to the power of, whereas e serves a similar purpose in decimal. The number after the p is decimal and represents the binary exponent.
Usually the number is normalised: that is, the leading hexadecimal digit is 1 (unless the value is exactly 0).
Example: 1.3DEp42 represents 1.3DE_{16} × 2^{42}.
Hexadecimal exponential notation is required by the IEEE 754 binary floatingpoint standard. This notation can be produced by some versions of the printf family of functions by using the %a conversion.
Conversion
Binary conversion
Most computers manipulate binary data, but it is difficult for humans to work with the large number of digits for even a relatively small binary number. Although most humans are familiar with the base 10 system, it is much easier to map binary to hexadecimal than to decimal because each hexadecimal digit maps to a whole number of bits (4_{10}). This example converts 1111_{2} to base ten. Since each position in a binary numeral can contain either a 1 or a 0, its value may be easily determined by its position from the right:
 0001_{2} = 1_{10}
 0010_{2} = 2_{10}
 0100_{2} = 4_{10}
 1000_{2} = 8_{10}
Therefore:
1111_{2}  = 8_{10} + 4_{10} + 2_{10} + 1_{10} 
= 15_{10} 
With little practice, mapping 1111_{2} to F_{16} in one step becomes easy: see table in Written representation. The advantage of using hexadecimal rather than decimal increases rapidly with the size of the number. When the number becomes large, conversion to decimal is very tedious. However, when mapping to hexadecimal, it is trivial to regard the binary string as 4digit groups and map each to a single hexadecimal digit.
This example shows the conversion of a binary number to decimal, mapping each digit to the decimal value, and adding the results.
01011110101101010010_{2}  = 262144_{10} + 65536_{10} + 32768_{10} + 16384_{10} + 8192_{10} + 2048_{10} + 512_{10} + 256_{10} + 64_{10} + 16_{10} + 2_{10} 
= 387922_{10} 
Compare this to the conversion to hexadecimal, where each group of four digits can be considered independently, and converted directly:
01011110101101010010_{2}  =  0101_{ }  1110_{ }  1011_{ }  0101_{ }  0010_{2} 
=  5  E  B  5  2_{16}  
=  5EB52_{16} 
The conversion from hexadecimal to binary is equally direct.
The octal system can also be useful as a tool for people who need to deal directly with binary computer data. Octal represents data as three bits per character, rather than four.
Divisionremainder in source base
As with all bases there is a simple algorithm for converting a representation of a number to hexadecimal by doing integer division and remainder operations in the source base. In theory, this is possible from any base, but for most humans only decimal and for most computers only binary (which can be converted by far more efficient methods) can be easily handled with this method.
Let d be the number to represent in hexadecimal, and the series h_{i}h_{i−1}...h_{2}h_{1} be the hexadecimal digits representing the number.
 i := 1
 h_{i} := d mod 16
 d := (d−h_{i}) / 16
 If d = 0 (return series h_{i}) else increment i and go to step 2
"16" may be replaced with any other base that may be desired.
The following is a JavaScript implementation of the above algorithm for converting any number to a hexadecimal in String representation. Its purpose is to illustrate the above algorithm. To work with data seriously, however, it is much more advisable to work with bitwise operators.
function toHex(d) {
var r = d % 16;
var result;
if (dr == 0)
result = toChar(r);
else
result = toHex( (dr)/16 ) + toChar(r);
return result;
}
function toChar(n) {
const alpha = "0123456789ABCDEF";
return alpha.charAt(n);
}
Addition and multiplication
It is also possible to make the conversion by assigning each place in the source base the hexadecimal representation of its place value and then performing multiplication and addition to get the final representation. That is, to convert the number B3AD to decimal one can split the hexadecimal number into its digits: B (11_{10}), 3 (3_{10}), A (10_{10}) and D (13_{10}), and then get the final result by multiplying each decimal representation by 16^{p}, where p is the corresponding hex digit position, counting from right to left, beginning with 0. In this case we have B3AD = (11 × 16^{3}) + (3 × 16^{2}) + (10 × 16^{1}) + (13 × 16^{0}), which is 45997 base 10.
Tools for conversion
Most modern computer systems with graphical user interfaces provide a builtin calculator utility, capable of performing conversions between various radices, in general including hexadecimal.
In Microsoft Windows, the Calculator utility can be set to Scientific mode (called Programmer mode in some versions), which allows conversions between radix 16 (hexadecimal), 10 (decimal), 8 (octal) and 2 (binary), the bases most commonly used by programmers. In Scientific Mode, the onscreen numeric keypad includes the hexadecimal digits A through F, which are active when "Hex" is selected. In hex mode, however, the Windows Calculator supports only integers.
Real numbers
As with other numeral systems, the hexadecimal system can be used to represent rational numbers, although recurring digits are common since sixteen (10_{hex}) has only a single prime factor (two):
1/2  0.8  1/6  0.2A  1/A  0.19  1/E  0.1249  
1/3  0.5  1/7  0.249  1/B  0.1745D  1/F  0.1  
1/4  0.4  1/8  0.2  1/C  0.15  1/10  0.1  
1/5  0.3  1/9  0.1C7  1/D  0.13B  1/11  0.0F 
where an overline denotes a recurring pattern.
For any base, 0.1 (or "1/10") is always equivalent to one divided by the representation of that base value in its own number system: Counting in base 3 is 0, 1, 2, 10 (three). Thus, whether dividing one by two for binary or dividing one by sixteen for hexadecimal, both of these fractions are written as 0.1
. Because the radix 16 is a perfect square (4²), fractions expressed in hexadecimal have an odd period much more often than decimal ones, and there are no cyclic numbers (other than trivial single digits). Recurring digits are exhibited when the denominator in lowest terms has a prime factor not found in the radix; thus, when using hexadecimal notation, all fractions with denominators that are not a power of two result in an infinite string of recurring digits (such as thirds and fifths). This makes hexadecimal (and binary) less convenient than decimal for representing rational numbers since a larger proportion lie outside its range of finite representation.
All rational numbers finitely representable in hexadecimal are also finitely representable in decimal, duodecimal, and sexagesimal: that is, any hexadecimal number with a finite number of digits has a finite number of digits when expressed in those other bases. Conversely, only a fraction of those finitely representable in the latter bases are finitely representable in hexadecimal. For example, decimal 0.1 corresponds to the infinite recurring representation 0.199999999999... in hexadecimal. However, hexadecimal is more efficient than bases 12 and 60 for representing fractions with powers of two in the denominator (e.g., decimal one sixteenth is 0.1 in hexadecimal, 0.09 in duodecimal, 0:3:45 in sexagesimal and 0.0625 in decimal).
In decimal Prime factors of the base: 2, 5 Prime factors of one below the base: 3 Prime factors of one above the base: 11 
In hexadecimal Prime factors of the base: 2 Prime factors of one below the base: 3, 5 Prime factors of one above the base: 11  
Fraction  Prime factors of the denominator 
Positional representation  Positional representation  Prime factors of the denominator 
Fraction 
1/2  2  0.5  0.8  2  1/2 
1/3  3  0.3333... = 0.Template:Overline  0.5555... = 0.Template:Overline  3  1/3 
1/4  2  0.25  0.4  2  1/4 
1/5  5  0.2  0.Template:Overline  5  1/5 
1/6  2, 3  0.1Template:Overline  0.2Template:Overline  2, 3  1/6 
1/7  7  0.Template:Overline  0.Template:Overline  7  1/7 
1/8  2  0.125  0.2  2  1/8 
1/9  3  0.Template:Overline  0.Template:Overline  3  1/9 
1/10  2, 5  0.1  0.1Template:Overline  2, 5  1/A 
1/11  11  0.Template:Overline  0.Template:Overline  B  1/B 
1/12  2, 3  0.08Template:Overline  0.1Template:Overline  2, 3  1/C 
1/13  13  0.Template:Overline  0.Template:Overline  D  1/D 
1/14  2, 7  0.0Template:Overline  0.1Template:Overline  2, 7  1/E 
1/15  3, 5  0.0Template:Overline  0.Template:Overline  3, 5  1/F 
1/16  2  0.0625  0.1  2  1/10 
1/17  17  0.Template:Overline  0.Template:Overline  11  1/11 
1/18  2, 3  0.0Template:Overline  0.0Template:Overline  2, 3  1/12 
1/19  19  0.Template:Overline  0.Template:Overline  13  1/13 
1/20  2, 5  0.05  0.0Template:Overline  2, 5  1/14 
1/21  3, 7  0.Template:Overline  0.Template:Overline  3, 7  1/15 
1/22  2, 11  0.0Template:Overline  0.0Template:Overline  2, B  1/16 
1/23  23  0.Template:Overline  0.Template:Overline  17  1/17 
1/24  2, 3  0.041Template:Overline  0.0Template:Overline  2, 3  1/18 
1/25  5  0.04  0.Template:Overline  5  1/19 
1/26  2, 13  0.0Template:Overline  0.0Template:Overline  2, D  1/1A 
1/27  3  0.Template:Overline  0.Template:Overline  3  1/1B 
1/28  2, 7  0.03Template:Overline  0.0Template:Overline  2, 7  1/1C 
1/29  29  0.Template:Overline  0.Template:Overline  1D  1/1D 
1/30  2, 3, 5  0.0Template:Overline  0.0Template:Overline  2, 3, 5  1/1E 
1/31  31  0.Template:Overline  0.Template:Overline  1F  1/1F 
1/32  2  0.03125  0.08  2  1/20 
1/33  3, 11  0.Template:Overline  0.Template:Overline  3, B  1/21 
1/34  2, 17  0.0Template:Overline  0.0Template:Overline  2, 11  1/22 
1/35  5, 7  0.0Template:Overline  0.Template:Overline  5, 7  1/23 
1/36  2, 3  0.02Template:Overline  0.0Template:Overline  2, 3  1/24 
Algebraic irrational number  In decimal  In hexadecimal 
√2 (the length of the diagonal of a unit square)  1.41421356237309...  1.6A09E667F3BCD... 
√3 (the length of the diagonal of a unit cube)  1.73205080756887...  1.BB67AE8584CAA... 
√5 (the length of the diagonal of a 1×2 rectangle)  2.2360679774997...  2.3C6EF372FE95... 
φ (phi, the golden ratio = (1+Template:Radical)/2  1.6180339887498...  1.9E3779B97F4A... 
Transcendental irrational number  
π (pi, the ratio of circumference to diameter)  3.1415926535897932384626433 8327950288419716939937510... 
3.243F6A8885A308D313198A2E0 3707344A4093822299F31D008... 
e (the base of the natural logarithm)  2.7182818284590452...  2.B7E151628AED2A6B... 
τ (the Thue–Morse constant)  0.412454033640...  0.6996 9669 9669 6996 ... 
γ (the limiting difference between the harmonic series and the natural logarithm)  0.5772156649015328606...  0.93C467E37DB0C7A4D1B... 
Powers
Powers of two have very simple expansions in hexadecimal. The first sixteen powers of two are shown below.
Cultural
Etymology
The word hexadecimal is composed of hexa, derived from the Greek έξ (hex) for "six", and decimal, derived from the Latin for "tenth". Webster's Third New International online derives "hexadecimal" as an alteration of the allLatin "sexadecimal" (which appears in the earlier Bendix documentation). The earliest date attested for "hexadecimal" in MerriamWebster Collegiate online is 1954, placing it safely in the category of international scientific vocabulary (ISV). It is common in ISV to mix Greek and Latin combining forms freely. The word "sexagesimal" (for base 60) retains the Latin prefix. Donald Knuth has pointed out that the etymologically correct term is "senidenary" (or possibly "sedenary"), from the Latin term for "grouped by 16". (The terms "binary", "ternary" and "quaternary" are from the same Latin construction, and the etymologically correct terms for "decimal" and "octal" arithmetic are "denary" and "octonary", respectively.)^{[11]} Alfred B. Taylor used "senidenary" in his mid1800s work on alternative number bases, although he rejected base 16 because of its "incommodious number of digits".^{[12]}^{[13]} Schwartzman notes that the expected form from usual Latin phrasing would be "sexadecimal", but computer hackers would be tempted to shorten that word to "sex".^{[14]} The etymologically proper Greek term would be hexadecadic (although in Modern Greek decahexadic (δεκαεξαδικός) is more commonly used).
Use in Chinese culture
The traditional Chinese units of weight were base16. For example, one jīn (斤) in the old system equals sixteen taels. The suanpan (Chinese abacus) could be used to perform hexadecimal calculations.
Primary numeral system
Similar to dozenal advocacy, there have been occasional attempts to promote hexadecimal as the preferred numeral system. These attempts usually propose pronunciation and/or symbology.^{[15]} Sometimes the proposal unifies standard measures so that they are multiples of 16.^{[16]}^{[17]}^{[18]}
An example of unifying standard measures is hexadecimal time, which subdivides a day by 16 so that there are 16 "hexhours" in a day.^{[18]}
Key to number base notation
Simple key for notations used in article:
Full text notation  Abbreviation  Number base 

binary  bin  2 
octal  oct  8 
decimal  dec  10 
hexadecimal  hex  16 
See also
 Base32, Base64 (content encoding schemes)
 Hex editor
 Hex dump
References
 ↑ Template:Cite web
 ↑ Template:Cite web
 ↑ The string
"\x1B[0m\x1B[25;1H"
specifies the character sequence Esc [ 0 m Esc [ 2 5 ; 1 H Nul. These are the escape sequences used on an ANSI terminal that reset the character set and color, and then move the cursor to line 25.  ↑ The VHDL MINIREFERENCE: VHDL IDENTIFIERS, NUMBERS, STRINGS, AND EXPRESSIONS
 ↑ MSX is Coming — Part 2: Inside MSX Compute!, issue 56, January 1985, p. 52
 ↑ BBC BASIC programs are not fully portable to Microsoft BASIC (without modification) since the latter takes
&
to prefix octal values. (Microsoft BASIC primarily uses&O
to prefix octal, and it uses&H
to prefix hexadecimal, but the ampersand alone yields a default interpretation as an octal prefix.  ↑ Donald E. Knuth. The TeXbook (Computers and Typesetting, Volume A). Reading, Massachusetts: Addison–Wesley, 1984. ISBN 0201134489. The source code of the book in TeX (and a required set of macros CTAN.org) is available online on CTAN.
 ↑ This somewhat odd sequence was from the next six sequential numeric keyboard codes in the LGP30's 6bit character code. LGP30 PROGRAMMING MANUAL
 ↑ Template:Cite web
 ↑ Letters to the editor: On binary notation, Bruce Alan Martin, Associated Universities Inc., Communications of the ACM, Volume 11, Issue 10 (October 1968) Page: 658 Template:Hide in printTemplate:Only in print
 ↑ Knuth, Donald. (1969). The Art of Computer Programming, Volume 2. ISBN 0201038021. (Chapter 17.)
 ↑ A.B. Taylor, Report on Weights and Measures, Pharmaceutical Association, 8th Annual Session, Boston, Sept. 15, 1859. See pages and 33 and 41.
 ↑ Alfred B. Taylor, "Octonary numeration and its application to a system of weights and measures", Proc Amer. Phil. Soc. Vol XXIV, Philadelphia, 1887; pages 296366. See pages 317 and 322.
 ↑ Schwartzman, S. (1994). The Words of Mathematics: an etymological dictionary of mathematical terms used in English. ISBN 0883855119.
 ↑ Template:Cite web
 ↑ Template:Cite web
 ↑ Template:Cite web
 ↑ ^{18.0} ^{18.1} {{#invoke:citation/CS1citation CitationClass=book }}