# Concentration

{{#invoke:Hatnote|hatnote}}

In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration. The term concentration can be applied to any kind of chemical mixture, but most frequently it refers to solutes and solvents in solutions. The molar (amount) concentration has variants such as normal concentration and osmotic concentration.

## Qualitative description These glasses containing red dye demonstrate qualitative changes in concentration. The solutions on the left are more dilute, compared to the more concentrated solutions on the right.

Often in informal, non-technical language, concentration is described in a qualitative way, through the use of adjectives such as "dilute" for solutions of relatively low concentration and "concentrated" for solutions of relatively high concentration. To concentrate a solution, one must add more solute (for example, alcohol), or reduce the amount of solvent (for example, water). By contrast, to dilute a solution, one must add more solvent, or reduce the amount of solute. Unless two substances are fully miscible there exists a concentration at which no further solute will dissolve in a solution. At this point, the solution is said to be saturated. If additional solute is added to a saturated solution, it will not dissolve, except in certain circumstances, when supersaturation may occur. Instead, phase separation will occur, leading to coexisting phases, either completely separated or mixed as a suspension. The point of saturation depends on many variables such as ambient temperature and the precise chemical nature of the solvent and solute.

## Quantitative notation

There are four quantities that describe concentration:

### Mass concentration

{{#invoke:main|main}}

$\rho _{i}={\frac {m_{i}}{V}}.$ The SI unit is kg/m3 (equal to g/L).

### Molar concentration

{{#invoke:main|main}}

$c_{i}={\frac {n_{i}}{V}}.$ The SI unit is mol/m3. However, more commonly the unit mol/L (= mol/dm3) is used.

### Number concentration

{{#invoke:main|main}}

The number concentration $C_{i}$ is defined as the number of entities of a constituent $N_{i}$ in a mixture divided by the volume of the mixture $V$ :

$C_{i}={\frac {N_{i}}{V}}.$ The SI unit is 1/m3.

### Volume concentration

$\phi _{i}={\frac {V_{i}}{V}}.$ Being dimensionless, it is expressed as a number, e.g., 0.18 or 18%; its unit is 1.

## Related quantities

Several other quantities can be used to describe the composition of a mixture. Note that these should not be called concentrations.

### Normality

{{#invoke:main|main}}

Normality is defined as the molar concentration $c_{i}$ divided by an equivalence factor $f_{\mathrm {eq} }$ . Since the definition of the equivalence factor depends on context (which reaction is being studied), IUPAC and NIST discourage the use of normality.

### Molality

{{#invoke:main|main}} (Not to be confused with Molarity)

The molality of a solution $b_{i}$ is defined as the amount of a constituent $n_{i}$ (in moles) divided by the mass of the solvent $m_{\mathrm {solvent} }$ (not the mass of the solution):

$b_{i}={\frac {n_{i}}{m_{\mathrm {solvent} }}}.$ The SI unit for molality is mol/kg.

### Mole fraction

{{#invoke:main|main}}

$x_{i}={\frac {n_{i}}{n_{\mathrm {tot} }}}.$ The SI unit is mol/mol. However, the deprecated parts-per notation is often used to describe small mole fractions.

### Mole ratio

{{#invoke:main|main}}

The mole ratio $r_{i}$ is defined as the amount of a constituent $n_{i}$ divided by the total amount of all other constituents in a mixture:

$r_{i}={\frac {n_{i}}{n_{\mathrm {tot} }-n_{i}}}.$ The SI unit is mol/mol. However, the deprecated parts-per notation is often used to describe small mole ratios.

### Mass fraction

{{#invoke:main|main}}

$w_{i}={\frac {m_{i}}{m_{\mathrm {tot} }}}.$ The SI unit is kg/kg. However, the deprecated parts-per notation is often used to describe small mass fractions.

### Mass ratio

{{#invoke:main|main}}

The mass ratio $\zeta _{i}$ is defined as the mass of a constituent $m_{i}$ divided by the total mass of all other constituents in a mixture:

$\zeta _{i}={\frac {m_{i}}{m_{\mathrm {tot} }-m_{i}}}.$ The SI unit is kg/kg. However, the deprecated parts-per notation is often used to describe small mass ratios.

## Dependence on volume

Concentration depends on the variation of the volume of the solution due mainly to thermal expansion.