Carbon dioxide scrubber

From formulasearchengine
Jump to navigation Jump to search

A carbon dioxide scrubber is a device which absorbs carbon dioxide (CO2). It is used to treat exhaust gases from industrial plants or from exhaled air in life support systems such as rebreathers or in spacecraft, submersible craft or airtight chambers. Carbon dioxide scrubbers are also used in controlled atmosphere (CA) storage.

Technologies

Amine scrubbing

{{#invoke:main|main}} The dominant application for CO2 scrubbing is for removal of CO2 from the exhaust of coal- and gas-fired power plants. Virtually the only technology being seriously evaluated involves the use of various amines, e.g. monoethanolamine. Cold solutions of these organic compounds bind CO2, but the binding is reversed at higher temperatures:

CO2 + 2HOCH2CH2NH2 HOCH2CH2NH3+HOCH2CH2NH(CO2-)

This technology has only been lightly implemented because of capital costs of installing the facility and the operating costs of utilizing it.[1]

Minerals and zeolites

Several minerals and mineral-like materials reversibly bind CO2.[2] Most often, these minerals are oxides, and often the CO2 is bound as carbonate. Carbon dioxide reacts with quicklime (calcium oxide), to form limestone (calcium carbonate).[3] The process is called Carbonate Looping. Other minerals include serpentinite, a magnesium silicate hydroxide and olivine.[4][5] Molecular sieves also function in this capacity.

Various scrubbing processes have been proposed to remove CO2 from the air, or from flue gases. These usually involve using a variant of the Kraft process. Scrubbing processes may be based on sodium hydroxide.[6][7] The CO2 is absorbed into solution, transferred to lime via a process called causticization and released in a kiln. With some modifications to the existing processes, mainly an oxygen-fired kiln, the end result is a concentrated stream of CO2 ready for storage or use in fuels. An alternative to this thermo-chemical process is an electrical one in which a nominal voltage is applied across the carbonate solution to release the CO2. While simpler, this electrical process consumes more energy as it splits water at the same time. Since it depends on electricity, the electricity needs to be renewable, like PV. Otherwise the CO2 produced during electricity production has to be taken into account. Early incarnations of air capture used electricity as the energy source; hence, were dependent on a carbon-free source. Thermal air capture systems use heat generated on-site, which reduces the inefficiencies associated with off-site electricity production, but of course it still needs a source of (carbon-free) heat. Concentrated solar power is an example of such a source.[8]

Sodium hydroxide

Zeman and Lackner outlined a specific method of air capture.[9]

First, CO2 is absorbed by an alkaline NaOH solution to produce dissolved sodium carbonate. The absorption reaction is a gas liquid reaction, strongly exothermic, (below)

2NaOH(aq) + CO2(g) → Na2CO3(aq) + H2O(l)


Na2CO3(aq) + Ca(OH)2(s) →-> 2NaOH(aq) + CaCO3(s)
ΔH° = -5.3 kJ/mol

Causticization is performed ubiquitously in the pulp and paper industry and readily transfers 94% of the carbonate ions from the sodium to the calcium cation.[9] Subsequently, the calcium carbonate precipitate is filtered from solution and thermally decomposed to produce gaseous CO2. The calcination reaction is the only endothermic reaction in the process and is shown (below).

CaCO3(s) → CaO(s) + CO2(g)
ΔH° = + 179.2 kJ/mol

The thermal decomposition of calcite is performed in a lime kiln fired with oxygen in order to avoid an additional gas separation step. Hydration of the lime (CaO) completes the cycle. Lime hydration is an exothermic reaction that can be performed with water or steam. Using water, it is a liquid/solid reaction as shown (below).

CaO(s) + H2O(l) → Ca(OH)2(s)
ΔH° = -64.5 kJ/mol

Lithium hydroxide

Other strong bases such as soda lime, sodium hydroxide, potassium hydroxide, and lithium hydroxide are able to remove carbon dioxide by chemically reacting with it. In particular, lithium hydroxide is used aboard spacecraft to remove carbon dioxide from the atmosphere. It reacts with carbon dioxide to make lithium carbonate:[10]

2 LiOH(s) + 2 H2O(g) → 2 LiOH.H2O(s)
2 LiOH.H2O(s) + CO2(g) → Li2CO3(s) + 3 H2O(g)

The net reaction being:

2 LiOH(s) + CO2(g) → Li2CO3(s) + H2O(g)

Lithium peroxide can also be used as it absorbs more CO2 per unit weight with the added advantage of releasing oxygen.[11] This is useful for breathing air systems and was used to remove CO2 from the Apollo spacecraft.

Regenerative carbon dioxide removal system

The regenerative carbon dioxide removal system (RCRS) on the space shuttle orbiter used a two-bed system that provided continuous removal of carbon dioxide without expendable products. Regenerable systems allowed a shuttle mission a longer stay in space without having to replenish its sorbent canisters. Older lithium hydroxide (LiOH)-based systems, which are non-regenerable, were replaced by regenerable metal-oxide-based systems. A system based on metal oxide primarily consisted of a metal oxide sorbent canister and a regenerator assembly. It worked by removing carbon dioxide using a sorbent material and then regenerating the sorbent material. The metal-oxide sorbent canister was regenerated by pumping air at approximately Template:Convert through it at a standardTemplate:Clarify flow rate of Template:Convert for 10 hours.[12]

Activated carbon

Activated carbon can be used as a carbon dioxide scrubber. Air with high carbon dioxide content, such as air from fruit storage locations, can be blown through beds of activated carbon and the carbon dioxide will adsorb onto the activated carbon. Once the bed is saturated it must then be "regenerated" by blowing low carbon dioxide air, such as ambient air, through the bed. This will release the carbon dioxide from the bed, and it can then be used to scrub again, leaving the net amount of carbon dioxide in the air the same as when the process was started.

Other methods

Many other methods and materials have been discussed for scrubbing carbon dioxide.

See also

References

  1. Gary T. Rochelle "Amine Scrubbing for CO2 Capture" Science volumen 325, 1652 (2009). Template:Hide in printTemplate:Only in print
  2. Sunho Choi, Jeffrey H. Drese, and Christopher W. Jones "Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources" ChemSusChem 2009, 2, 796 – 854. Template:Hide in printTemplate:Only in print
  3. Template:Cite web
  4. Template:Cite web
  5. [1]Template:Dead link
  6. Template:Cite news
  7. Template:Cite web
  8. Template:Cite web
  9. 9.0 9.1 {{#invoke:Citation/CS1|citation |CitationClass=journal }}
  10. {{#invoke:Citation/CS1|citation |CitationClass=journal }}
  11. Template:Cite doi
  12. Template:Cite web
  13. Template:Cite web
  14. [2]Template:Dead link
  15. [3]Template:Dead link

Template:Underwater breathing apparatus