Ultrafinitism

30 year-old Entertainer or Range Artist Wesley from Drumheller, really loves vehicle, property developers properties for sale in singapore singapore and horse racing. Finds inspiration by traveling to Works of Antoni Gaudí. In computer science, algorithmic efficiency is used to describe those properties of an algorithm which relate to the amount of resources used by the algorithm. An algorithm must be analysed to determine its resource usage. Algorithmic efficiency can be thought of as analogous to engineering productivity for a repeating or continuous process.

For maximum efficiency we wish to minimize resource usage. However, the various resources (e.g. time, space) can not be compared directly, so which of two algorithms is considered to be more efficient often depends on which measure of efficiency is being considered as the most important, e.g. is the requirement for high speed, or for minimum memory usage, or for some other measure?

Note that this article is not about optimization, which is discussed in program optimization, optimizing compiler, loop optimization, object code optimizer, etc. The term 'optimization' is itself misleading, since all that can generally be done is an 'improvement'.

Background

The importance of efficiency with respect to time was emphasised by Ada Lovelace in 1843 as applying to Charles Babbage's mechanical analytical engine:

"In almost every computation a great variety of arrangements for the succession of the processes is possible, and various considerations must influence the selections amongst them for the purposes of a calculating engine. One essential object is to choose that arrangement which shall tend to reduce to a minimum the time necessary for completing the calculation"

Early electronic computers were severely limited both by the speed of operations and the amount of memory available. In some cases it was realised that there was a space–time tradeoff, whereby a task could be handled either by using a fast algorithm which used quite a lot of working memory, or by using a slower algorithm which used very little working memory. The engineering tradeoff was then to use the fastest algorithm which would fit in the available memory.

Modern computers are very much faster than the early computers, and have a much larger amount of memory available (Gigabytes instead of Kilobytes). Nevertheless, Donald Knuth emphasised that efficiency is still an important consideration:

"In established engineering disciplines a 12% improvement, easily obtained, is never considered marginal and I believe the same viewpoint should prevail in software engineering"

Overview

An algorithm is considered efficient if its resource consumption is at or below some acceptable level. Roughly speaking, 'acceptable' means: will it run in a reasonable amount of time on an available computer. Since the 1950s computers have seen dramatic increases in both the available computational power and in the available amount of memory, so current acceptable levels would have been unacceptable even 10 years ago.

Computer manufacturers frequently bring out new models, often with higher performance. Software costs can be quite high, so in some cases the simplest and cheapest way of getting higher performance might be to just buy a faster computer, provided it is compatible with an existing computer.

There are many ways in which the resources used by an algorithm can be measured: the two most common measures are speed and memory usage; other measures could include transmission speed, temporary disk usage, long-term disk usage, power consumption, total cost of ownership, response time to external stimuli, etc. Many of these measures depend on the size of the input to the algorithm (i.e. the amount of data to be processed); they might also depend on the way in which the data is arranged (e.g. some sorting algorithms perform poorly on data which is already sorted, or which is sorted in reverse order).

In practice, there are other factors which can affect the efficiency of an algorithm, such as requirements for accuracy and/or reliability. As detailed below, the way in which an algorithm is implemented can also have a significant effect on actual efficiency, though many aspects of this relate to optimization issues.

Theoretical analysis

In the theoretical analysis of algorithms, the normal practice is to estimate their complexity in the asymptotic sense, i.e. use Big O notation to represent the complexity of an algorithm as a function of the size of the input n. This is generally sufficiently accurate when n is large, but may be misleading for small values of n (e.g. bubble sort may be faster than quicksort when only a few items are to be sorted).

Some examples of Big O notation include:

Notation	Name	Examples
$O(1)\,$	constant	Determining if a number is even or odd; Using a constant-size lookup table; Using a suitable hash function for looking up an item.
$O(\log n)\,$	logarithmic	Finding an item in a sorted array with a binary search or a balanced search tree as well as all operations in a Binomial heap.
$O(n)\,$	linear	Finding an item in an unsorted list or a malformed tree (worst case) or in an unsorted array; Adding two n-bit integers by ripple carry.
$O(n\log n)\,$	linearithmic, loglinear, or quasilinear	Performing a Fast Fourier transform; heapsort, quicksort (best and average case), or merge sort
$O(n^{2})\,$	quadratic	Multiplying two n-digit numbers by a simple algorithm; bubble sort (worst case or naive implementation), Shell sort, quicksort (worst case), selection sort or insertion sort
$O(c^{n}),\;c>1$	exponential	Finding the (exact) solution to the travelling salesman problem using dynamic programming; determining if two logical statements are equivalent using brute-force search

Benchmarking: measuring performance

For new versions of software or to provide comparisons with competitive systems, benchmarks are sometimes used, which assist with gauging an algorithms relative performance. If a new sort algorithm is produced for example it can be compared with its predecessors to ensure that at least it is efficient as before with known data—taking into consideration any functional improvements. Benchmarks can be used by customers when comparing various products from alternative suppliers to estimate which product will best suit their specific requirements in terms of functionality and performance. For example in the mainframe world certain proprietary sort products from independent software companies such as Syncsort compete with products from the major suppliers such as IBM for speed.

Some benchmarks provide opportunities for producing an analysis comparing the relative speed of various compiled and interpreted languages for example and The Computer Language Benchmarks Game compares the performance of implementations of typical programming problems in several programming languages.

(Even creating "do it yourself" benchmarks to get at least some appreciation of the relative performance of different programming languages, using a variety of user specified criteria, is quite simple to produce as this "Nine language Performance roundup" by Christopher W. Cowell-Shah demonstrates by example)

Implementation issues

Implementation issues can also have an effect on actual efficiency, such as the choice of programming language, or the way in which the algorithm is actually coded, or the choice of a compiler for a particular language, or the compilation options used, or even the operating system being used. In some cases a language implemented by an interpreter may be much slower than a language implemented by a compiler.

There are other factors which may affect time or space issues, but which may be outside of a programmer's control; these include data alignment, data granuality, garbage collection, instruction-level parallelism, and subroutine calls.

Some processors have capabilities for vector processing, which allow a single instruction to operate on multiple operands; it may or may not be easy for a programmer or compiler to use these capabilities. Algorithms designed for sequential processing may need to be completely redesigned to make use of parallel processing.

Another problem which can arise with compatible processors is that they may implement an instruction in different ways, so that instructions which are relatively fast on some models may be relatively slow on other models; this can make life difficult for an optimizing compiler.

Measures of resource usage

Measures are normally expressed as a function of the size of the input n.

The two most common measures are:

• Time: how long does the algorithm take to complete.
• Space: how much working memory (typically RAM) is needed by the algorithm. This has two aspects: the amount of memory needed by the code, and the amount of memory needed for the data on which the code operates.

For computers whose power is supplied by a battery (e.g. laptops), or for very long/large calculations (e.g. supercomputers), other measures of interest are:

• Direct power consumption: power needed directly to operate the computer.
• Indirect power consumption: power needed for cooling, lighting, etc.

In some cases other less common measures may also be relevant:

• Transmission size: bandwidth could be a limiting factor. Data compression can be used to reduce the amount of data to be transmitted. Displaying a picture or image (e.g. Google logo) can result in transmitting tens of thousands of bytes (48K in this case) compared with transmitting six bytes for the text "Google".
• External space: space needed on a disk or other external memory device; this could be for temporary storage while the algorithm is being carried out, or it could be long-term storage needed to be carried forward for future reference.
• Response time: this is particularly relevant in a real-time application when the computer system must respond quickly to some external event.
• Total cost of ownership: particularly if a computer is dedicated to one particular algorithm.

Time

Theory

Analyse the algorithm, typically using time complexity analysis to get an estimate of the running time as a function as the size of the input data. The result is normally expressed using Big O notation. This is useful for comparing algorithms, especially when a large amount of data is to processed. More detailed estimates are needed for algorithm comparison when the amount of data is small (though in this situation time is less likely to be a problem anyway). Algorithms which include parallel processing may be more difficult to analyse.

Practice

Use a benchmark to time the use of an algorithm. Many programming languages have an available function which provides CPU time usage. For long-running algorithms the elapsed time could also be of interest. Results should generally be averaged over several tests.

This sort of test can be very sensitive to hardware configuration and the possibility of other programs or tasks running at the same time in a multi-processing and multi-programming environment.

This sort of test also depends heavily on the selection of a particular programming language, compiler, and compiler options, so algorithms being compared must all be implemented under the same conditions.

Space

This section is concerned with the use of main memory (often RAM) while the algorithm is being carried out. As for time analysis above, analyse the algorithm, typically using space complexity analysis to get an estimate of the run-time memory needed as a function as the size of the input data. The result is normally expressed using Big O notation.

There are up to four aspects of memory usage to consider:

• The amount of memory needed to hold the code for the algorithm.
• The amount of memory needed for the input data.
• The amount of memory needed for any output data (some algorithms, such as sorting, often just rearrange the input data and don't need any space for output data).
• The amount of memory needed as working space during the calculation (this includes both named variables and any stack space needed by routines called during the calculation; this stack space can be significant for algorithms which use recursive techniques).

Early electronic computers, and early home computers, had relatively small amounts of working memory. E.g. the 1949 EDSAC had a maximum working memory of 1024 17-bit words, while the 1980 Sinclair ZX80 came initially with 1024 8-bit bytes of working memory.

Current computers can have relatively large amounts of memory (possibly Gigabytes), so having to squeeze an algorithm into a confined amount of memory is much less of a problem than it used to be. But the presence of three different categories of memory can be significant:

• Cache memory (often static RAM) - this operates at speeds comparable with the CPU.
• Main physical memory (often dynamic RAM) - this operates somewhat slower than the CPU.
• Virtual memory (often on disk) - this gives the illusion of lots of memory, and operates thousands of times slower than RAM.

An algorithm whose memory needs will fit in cache memory will be much faster than an algorithm which fits in main memory, which in turn will be very much faster than an algorithm which has to resort to virtual memory. To further complicate the issue, some systems have up to three levels of cache memory, with varying effective speeds. Different systems will have different amounts of these various types of memory, so the effect of algorithm memory needs can vary greatly from one system to another.

In the early days of electronic computing, if an algorithm and its data wouldn't fit in main memory then the algorithm couldn't be used. Nowadays the use of virtual memory appears to provide lots of memory, but at the cost of performance. If an algorithm and its data will fit in cache memory, then very high speed can be obtained; in this case minimising space will also help minimise time. An algorithm which will not fit completely in cache memory but which exhibits locality of reference may perform reasonably well.

Examples of efficient algorithms

• quicksort First known sorting algorithm with speed of order $O(n\log n)\,$.
• heapsort Another fast sorting algorithm.
• binary search Searching an ordered table.
• Boyer–Moore string search algorithm Finding a string within another string.

Criticism of the current state of programming

• David May FRS a British computer scientist and currently Professor of Computer Science at University of Bristol and founder and CTO of XMOS Semiconductor, believes one of the problems is that there is a reliance on Moore's law to solve inefficiencies. He has advanced an 'alternative' to Moore's law (May's law) stated as follows:

  Software efficiency halves every 18 months, compensating Moore's Law

  He goes on to state

  In ubiquitous systems, halving the instructions executed can double the battery life and big data sets bring big opportunities for better software and algorithms: Reducing the number of operations from N x N to N x log(N) has a dramatic effect when N is large... for N = 30 billion, this change is as good as 50 years of technology improvements

• Software author Adam N. Rosenburg in his blog "The failure of the Digital computer", has described the current state of programming as nearing the "Software event horizon", (alluding to the fictitious "shoe event horizon" described by Douglas Adams in his Hitchhiker's Guide to the Galaxy book). He estimates there has been a 70 dB factor loss of productivity or "99.99999 percent, of its ability to deliver the goods", since the 1980s—"When Arthur C. Clarke compared the reality of computing in 2001 to the computer HAL in his book 2001: A Space Odyssey, he pointed out how wonderfully small and powerful computers were but how disappointing computer programming had become".
• Conrad Weisert gives examples, some of which were published in ACM SIGPLAN (Special Interest Group on Programming Languages) Notices, December 1995 in: "Atrocious Programming Thrives"
• Marc Andreessen co-founder of Netscape is quoted in "Mavericks at Work" (ISBN 0060779616) as saying "Five great programmers can completely outperform 1,000 mediocre programmers."[1]

Competitions for the best algorithms

The following competitions invite entries for the best algorithms based on some arbitrary criteria decided by the judges:-

• Wired magazine

See also

• Analysis of algorithms - how to determine the resources needed by an algorithm
• Arithmetic coding—a form of variable-length entropy encoding for efficient data compression
• Associative array—a data structure that can be made more efficient using Patricia trees or Judy arrays
• Binary search algorithm—a simple and efficient technique for searching sorted arrays
• Benchmark—a method for measuring comparative execution times in defined cases
• Best, worst and average case—considerations for estimating execution times in three scenarios
• Branch table—a technique for reducing instruction path-length, size of machine code, (and often also memory)
• Comparison of programming paradigms—paradigm specific performance considerations
• Compiler optimization—compiler-derived optimization
• Computational complexity theory
• Computer performance—computer hardware metrics
• Data compression—reducing transmission bandwidth and disk storage
• Database index—a data structure that improves the speed of data retrieval operations on a database table
• Entropy encoding—encoding data efficiently using frequency of occurrence of strings as a criterion for substitution
• Garbage collection—automatic freeing of memory after use
• Green computing—a move to implement 'greener' technologies, consuming less resources
• Huffman algorithm—an algorithm for efficient data encoding
• Locality of reference—for avoidance of caching delays caused by non-local memory access
• Loop optimization
• Memory management
• Optimization (computer science)
• Performance analysis—methods of measuring actual performance of an algorithm at run-time
• Real-time computing—further examples of time-critical applications
• Run-time analysis—estimation of expected run-times and an algorithm's scalability
• Super-threading
• Simultaneous multithreading
• Speculative execution or Eager execution
• Threaded code—similar to virtual method table or branch table
• Virtual method table—branch table with dynamically assigned pointers for dispatching
• Improving Managed code Performance—Microsoft MSDN Library

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

External links

DTZ's auction group in Singapore auctions all types of residential, workplace and retail properties, retailers, homes, accommodations, boarding houses, industrial buildings and development websites. Auctions are at the moment held as soon as a month.

Whitehaven @ Pasir Panjang – A boutique improvement nicely nestled peacefully in serene Pasir Panjang personal estate presenting a hundred and twenty rare freehold private apartments tastefully designed by the famend Ong & Ong Architect. Only a short drive away from Science Park and NUS Campus, Jade Residences, a recent Freehold condominium which offers high quality lifestyle with wonderful facilities and conveniences proper at its door steps. Its fashionable linear architectural fashion promotes peace and tranquility living nestled within the D19 personal housing enclave. Rising workplace sector leads real estate market efficiency, while prime retail and enterprise park segments moderate and residential sector continues in decline International Market Perspectives - 1st Quarter 2014

There are a lot of websites out there stating to be one of the best seek for propertycondominiumhouse, and likewise some ways to discover a low cost propertycondominiumhouse. Owning a propertycondominiumhouse in Singapore is the dream of virtually all individuals in Singapore, It is likely one of the large choice we make in a lifetime. Even if you happen to're new to Property listing singapore funding, we are right here that will help you in making the best resolution to purchase a propertycondominiumhouse at the least expensive value.

Jun 18 ROCHESTER in MIXED USE IMPROVEMENT $1338000 / 1br - 861ft² - (THE ROCHESTER CLOSE TO NORTH BUONA VISTA RD) pic real property - by broker Jun 18 MIXED USE IMPROVEMENT @ ROCHESTER @ ROCHESTER PK $1880000 / 1br - 1281ft² - (ROCHESTER CLOSE TO NORTH BUONA VISTA) pic real estate - by broker Tue 17 Jun Jun 17 Sunny Artwork Deco Gem Near Seashore-Super Deal!!! $103600 / 2br - 980ft² - (Ventnor) pic actual estate - by owner Jun 17 Freehold semi-d for rent (Jalan Rebana ) $7000000 / 5909ft² - (Jalan Rebana ) actual property - by dealer Jun sixteen Ascent @ 456 in D12 (456 Balestier Highway,Singapore) pic real property - by proprietor Jun 16 RETAIL SHOP AT SIM LIM SQUARE FOR SALE, IT MALL, ROCHOR, BUGIS MRT $2000000 / 506ft² - (ROCHOR, BUGIS MRT) pic real estate - by dealer HDB Scheme Any DBSS BTO

In case you are eligible to purchase landed houses (open solely to Singapore residents) it is without doubt one of the best property investment choices. Landed housing varieties solely a small fraction of available residential property in Singapore, due to shortage of land right here. In the long term it should hold its worth and appreciate as the supply is small. In truth, landed housing costs have risen the most, having doubled within the last eight years or so. However he got here back the following day with two suitcases full of money. Typically we've got to clarify to such folks that there are rules and paperwork in Singapore and you can't just buy a home like that,' she said. For conveyancing matters there shall be a recommendedLondon Regulation agency familiar with Singapore London propertyinvestors to symbolize you

Sales transaction volumes have been expected to hit four,000 units for 2012, close to the mixed EC gross sales volume in 2010 and 2011, in accordance with Savills Singapore. Nevertheless the last quarter was weak. In Q4 2012, sales transactions were 22.8% down q-q to 7,931 units, in line with the URA. The quarterly sales discount was felt throughout the board. When the sale just starts, I am not in a hurry to buy. It's completely different from a private sale open for privileged clients for one day solely. Orchard / Holland (D09-10) House For Sale The Tembusu is a singular large freehold land outdoors the central area. Designed by multiple award-profitable architects Arc Studio Architecture + Urbanism, the event is targeted for launch in mid 2013. Post your Property Condos Close to MRT

• Animation of the Boyer-Moore algorithm (Java Applet)
• "How algorithms shape our world". A TED (conference) Talk by Kevin Slavin.
• Misconceptions about algorithmic efficiency in high-schools