Permeance

Template:Classical mechanics A rotating frame of reference is a special case of a non-inertial reference frame that is rotating relative to an inertial reference frame. An everyday example of a rotating reference frame is the surface of the Earth. (This article considers only frames rotating about a fixed axis. For more general rotations, see Euler angles.)

Fictitious forces

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. All non-inertial reference frames exhibit fictitious forces. Rotating reference frames are characterized by three fictitious forces

• the centrifugal force
• the Coriolis force

and, for non-uniformly rotating reference frames,

• the Euler force.

Scientists living in a rotating box can measure the speed and direction of their rotation by measuring these fictitious forces. For example, Léon Foucault was able to show the Coriolis force that results from the Earth's rotation using the Foucault pendulum. If the Earth were to rotate many times faster, these fictitious forces could be felt by humans, as they are when on a spinning carousel.

Relating rotating frames to stationary frames

The following is a derivation of the formulas for accelerations as well as fictitious forces in a rotating frame. It begins with the relation between a particle's coordinates in a rotating frame and its coordinates in an inertial (stationary) frame. Then, by taking time derivatives, formulas are derived that relate the velocity of the particle as seen in the two frames, and the acceleration relative to each frame. Using these accelerations, the fictitious forces are identified by comparing Newton's second law as formulated in the two different frames.

Relation between positions in the two frames

To derive these fictitious forces, it's helpful to be able to convert between the coordinates $\left(x',y',z'\right)$ of the rotating reference frame and the coordinates $\left(x,y,z\right)$ of an inertial reference frame with the same origin. If the rotation is about the $z$ axis with an angular velocity $\Omega$ and the two reference frames coincide at time $t=0$, the transformation from rotating coordinates to inertial coordinates can be written

$x=x'\cos \left(\Omega t\right)-y'\sin \left(\Omega t\right)$

$y=x'\sin \left(\Omega t\right)+y'\cos \left(\Omega t\right)$

whereas the reverse transformation is

$x'=x\cos \left(-\Omega t\right)-y\sin \left(-\Omega t\right)$

$y'=x\sin \left(-\Omega t\right)+y\cos \left(-\Omega t\right)$

This result can be obtained from a rotation matrix.

Introduce the unit vectors ${\hat {\boldsymbol {\imath }}},\ {\hat {\boldsymbol {\jmath }}},\ {\hat {\boldsymbol {k}}}$ representing standard unit basis vectors in the rotating frame. The time-derivatives of these unit vectors are found next. Suppose the frames are aligned at t = 0 and the z-axis is the axis of rotation. Then for a counterclockwise rotation through angle Ωt:

${\hat {\boldsymbol {\imath }}}(t)=(\cos \Omega t,\ \sin \Omega t)$

where the (x, y) components are expressed in the stationary frame. Likewise,

${\hat {\boldsymbol {\jmath }}}(t)=(-\sin \Omega t,\ \cos \Omega t)\ .$

Thus the time derivative of these vectors, which rotate without changing magnitude, is

${\frac {d}{dt}}{\hat {\boldsymbol {\imath }}}(t)=\Omega (-\sin \Omega t,\ \cos \Omega t)=\Omega {\hat {\boldsymbol {\jmath }}}\ ;$

${\frac {d}{dt}}{\hat {\boldsymbol {\jmath }}}(t)=\Omega (-\cos \Omega t,\ -\sin \Omega t)=-\Omega {\hat {\boldsymbol {\imath }}}\ .$

This result is the same as found using a vector cross product with the rotation vector ${\boldsymbol {\Omega }}$ pointed along the z-axis of rotation ${\boldsymbol {\Omega }}=(0,\ 0,\ \Omega )$, namely,

${\frac {d}{dt}}{\hat {\boldsymbol {u}}}={\boldsymbol {\Omega \times }}{\hat {\boldsymbol {u}}}\ ,$

where ${\hat {\boldsymbol {u}}}$ is either ${\hat {\boldsymbol {\imath }}}$ or ${\hat {\boldsymbol {\jmath }}}$.

Time derivatives in the two frames

Introduce the unit vectors ${\hat {\boldsymbol {\imath }}},\ {\hat {\boldsymbol {\jmath }}},\ {\hat {\boldsymbol {k}}}$ representing standard unit basis vectors in the rotating frame. As they rotate they will remain normalized. If we let them rotate at the speed of $\Omega$ about an axis ${\boldsymbol {\Omega }}$ then each unit vector ${\hat {\boldsymbol {u}}}$ of the rotating coordinate system abides by the following equation:

${\frac {d}{dt}}{\hat {\boldsymbol {u}}}={\boldsymbol {\Omega \times {\hat {u}}}}\ .$

Then if we have a vector function ${\boldsymbol {f}}$,

${\boldsymbol {f}}(t)=f_{x}(t){\hat {\boldsymbol {\imath }}}+f_{y}(t){\hat {\boldsymbol {\jmath }}}+f_{z}(t){\hat {\boldsymbol {k}}}\ ,$

and we want to examine its first dervative we have (using the product rule of differentiation):

${\frac {d}{dt}}{\boldsymbol {f}}={\frac {df_{x}}{dt}}{\hat {\boldsymbol {\imath }}}+{\frac {d{\hat {\boldsymbol {\imath }}}}{dt}}f_{x}+{\frac {df_{y}}{dt}}{\hat {\boldsymbol {\jmath }}}+{\frac {d{\hat {\boldsymbol {\jmath }}}}{dt}}f_{y}+{\frac {df_{z}}{dt}}{\hat {\boldsymbol {k}}}+{\frac {d{\hat {\boldsymbol {k}}}}{dt}}f_{z}$

$={\frac {df_{x}}{dt}}{\hat {\boldsymbol {\imath }}}+{\frac {df_{y}}{dt}}{\hat {\boldsymbol {\jmath }}}+{\frac {df_{z}}{dt}}{\hat {\boldsymbol {k}}}+[{\boldsymbol {\Omega \times }}(f_{x}{\hat {\boldsymbol {\imath }}}+f_{y}{\hat {\boldsymbol {\jmath }}}+f_{z}{\hat {\boldsymbol {k}}})]$

$=\left({\frac {d{\boldsymbol {f}}}{dt}}\right)_{r}+{\boldsymbol {\Omega \times f}}(t)\ ,$

where $\left({\frac {d{\boldsymbol {f}}}{dt}}\right)_{r}$ is the rate of change of ${\boldsymbol {f}}$ as observed in the rotating coordinate system. As a shorthand the differentiation is expressed as:

${\frac {d}{dt}}{\boldsymbol {f}}=\left[\left({\frac {d}{dt}}\right)_{r}+{\boldsymbol {\Omega \times }}\right]{\boldsymbol {f}}\ .$

This result is also known as the Transport Theorem in analytical dynamics, and is also sometimes referred to as the Basic Kinematic Equation.

Relation between velocities in the two frames

A velocity of an object is the time-derivative of the object's position, or

$\mathbf {v} \ {\stackrel {\mathrm {def} }{=}}\ {\frac {d\mathbf {r} }{dt}}$

The time derivative of a position ${\boldsymbol {r}}(t)$ in a rotating reference frame has two components, one from the explicit time dependence due to motion of the particle itself, and another from the frame's own rotation. Applying the result of the previous subsection to the displacement ${\boldsymbol {r}}(t)$, the velocities in the two reference frames are related by the equation

$\mathbf {v_{i}} \ {\stackrel {\mathrm {def} }{=}}\ {\frac {d\mathbf {r} }{dt}}=\left({\frac {d\mathbf {r} }{dt}}\right)_{\mathrm {r} }+{\boldsymbol {\Omega }}\times \mathbf {r} =\mathbf {v} _{\mathrm {r} }+{\boldsymbol {\Omega }}\times \mathbf {r} \ ,$

where subscript i means the inertial frame of reference, and r means the rotating frame of reference.

Relation between accelerations in the two frames

Acceleration is the second time derivative of position, or the first time derivative of velocity

$\mathbf {a} _{\mathrm {i} }\ {\stackrel {\mathrm {def} }{=}}\ \left({\frac {d^{2}\mathbf {r} }{dt^{2}}}\right)_{\mathrm {i} }=\left({\frac {d\mathbf {v} }{dt}}\right)_{\mathrm {i} }=\left[\left({\frac {d}{dt}}\right)_{\mathrm {r} }+{\boldsymbol {\Omega }}\times \right]\left[\left({\frac {d\mathbf {r} }{dt}}\right)_{\mathrm {r} }+{\boldsymbol {\Omega }}\times \mathbf {r} \right]\ ,$

where subscript i means the inertial frame of reference. Carrying out the differentiations and re-arranging some terms yields the acceleration in the rotating reference frame

$\mathbf {a} _{\mathrm {r} }=\mathbf {a} _{\mathrm {i} }-2{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {r} }-{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {r} )-{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {r}$

where $\mathbf {a} _{\mathrm {r} }\ {\stackrel {\mathrm {def} }{=}}\ \left({\frac {d^{2}\mathbf {r} }{dt^{2}}}\right)_{\mathrm {r} }$ is the apparent acceleration in the rotating reference frame, the term $-{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {r} )$ represents centrifugal acceleration, and the term $-2{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {r} }$ is the coriolis effect.

Newton's second law in the two frames

When the expression for acceleration is multiplied by the mass of the particle, the three extra terms on the right-hand side result in fictitious forces in the rotating reference frame, that is, apparent forces that result from being in a non-inertial reference frame, rather than from any physical interaction between bodies.

Using Newton's second law of motion $\mathbf {F} =m\mathbf {a}$, we obtain:

• the Coriolis force

$\mathbf {F} _{\mathrm {Coriolis} }=-2m{\boldsymbol {\Omega }}\times \mathbf {v} _{\mathrm {r} }$

• the centrifugal force

$\mathbf {F} _{\mathrm {centrifugal} }=-m{\boldsymbol {\Omega }}\times ({\boldsymbol {\Omega }}\times \mathbf {r} )$

• and the Euler force

$\mathbf {F} _{\mathrm {Euler} }=-m{\frac {d{\boldsymbol {\Omega }}}{dt}}\times \mathbf {r}$

where $m$ is the mass of the object being acted upon by these fictitious forces. Notice that all three forces vanish when the frame is not rotating, that is, when ${\boldsymbol {\Omega }}=0\ .$

For completeness, the inertial acceleration $\mathbf {a} _{\mathrm {i} }$ due to impressed external forces $\mathbf {F} _{\mathrm {imp} }$ can be determined from the total physical force in the inertial (non-rotating) frame (for example, force from physical interactions such as electromagnetic forces) using Newton's second law in the inertial frame:

$\mathbf {F} _{\mathrm {imp} }=m\mathbf {a} _{\mathrm {i} }$

Newton's law in the rotating frame then becomes

$\mathbf {F_{r}} =\mathbf {F} _{\mathrm {imp} }+\mathbf {F} _{\mathrm {centrifugal} }+\mathbf {F} _{\mathrm {Coriolis} }+\mathbf {F} _{\mathrm {Euler} }=m\mathbf {a_{r}} \ .$

In other words, to handle the laws of motion in a rotating reference frame: 36 year-old Diving Instructor (Open water ) Vancamp from Kuujjuaq, spends time with pursuits for instance gardening, public listed property developers in singapore developers in singapore and cigar smoking. Of late took some time to go China Danxia. 36 year-old Diving Instructor (Open water ) Vancamp from Kuujjuaq, spends time with pursuits for instance gardening, public listed property developers in singapore developers in singapore and cigar smoking. Of late took some time to go China Danxia. 36 year-old Diving Instructor (Open water ) Vancamp from Kuujjuaq, spends time with pursuits for instance gardening, public listed property developers in singapore developers in singapore and cigar smoking. Of late took some time to go China Danxia.

Centrifugal force

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. In classical mechanics, centrifugal force is an outward force associated with rotation. Centrifugal force is one of several so-called pseudo-forces (also known as inertial forces), so named because, unlike real forces, they do not originate in interactions with other bodies situated in the environment of the particle upon which they act. Instead, centrifugal force originates in the rotation of the frame of reference within which observations are made.

Coriolis effect

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church.

Figure 1: In the inertial frame of reference (upper part of the picture), the black object moves in a straight line. However, the observer (red dot) who is standing in the rotating frame of reference (lower part of the picture) sees the object as following a curved path.

The mathematical expression for the Coriolis force appeared in an 1835 paper by a French scientist Gaspard-Gustave Coriolis in connection with hydrodynamics, and also in the tidal equations of Pierre-Simon Laplace in 1778. Early in the 20th century, the term Coriolis force began to be used in connection with meteorology.

Perhaps the most commonly encountered rotating reference frame is the Earth. Moving objects on the surface of the Earth experience a Coriolis force, and appear to veer to the right in the northern hemisphere, and to the left in the southern. Movements of air in the atmosphere and water in the ocean are notable examples of this behavior: rather than flowing directly from areas of high pressure to low pressure, as they would on a non-rotating planet, winds and currents tend to flow to the right of this direction north of the equator, and to the left of this direction south of the equator. This effect is responsible for the rotation of large cyclones (see Coriolis effects in meteorology).

Euler force

Mining Engineer (Excluding Oil ) Truman from Alma, loves to spend time knotting, largest property developers in singapore developers in singapore and stamp collecting. Recently had a family visit to Urnes Stave Church. In classical mechanics, the Euler acceleration (named for Leonhard Euler), also known as azimuthal acceleration or transverse acceleration is an acceleration that appears when a non-uniformly rotating reference frame is used for analysis of motion and there is variation in the angular velocity of the reference frame's axis. This article is restricted to a frame of reference that rotates about a fixed axis.

The Euler force is a fictitious force on a body that is related to the Euler acceleration by F  = ma, where a is the Euler acceleration and m is the mass of the body.

Use in magnetic resonance

It is convenient to consider magnetic resonance in a frame that rotates at the Larmor frequency of the spins. This is illustrated in the animation below. The rotating wave approximation may also be used.

References

43 year old Petroleum Engineer Harry from Deep River, usually spends time with hobbies and interests like renting movies, property developers in singapore new condominium and vehicle racing. Constantly enjoys going to destinations like Camino Real de Tierra Adentro.

See also

• Absolute rotation
• Centrifugal force (rotating reference frame) Centrifugal force as seen from systems rotating about a fixed axis
• Mechanics of planar particle motion Fictitious forces exhibited by a particle in planar motion as seen by the particle itself and by observers in a co-rotating frame of reference
• Coriolis force The effect of the Coriolis force on the Earth and other rotating systems
• Inertial frame of reference
• Non-inertial frame
• Fictitious force A more general treatment of the subject of this article

External links

• Animation clip showing scenes as viewed from both an inertial frame and a rotating frame of reference, visualizing the Coriolis and centrifugal forces.