|
|
| Line 1: |
Line 1: |
| '''Premelting''' (also: '''Surface melting''') describes the fact that, even below its melting point (<math> T_m </math>), [[quasi-liquid]] films can be observed on crystalline surfaces. The thickness of the film is temperature (<math> T </math>) dependent. This effect is common for all crystalline materials.
| | Emilia Shryock is my name but you can call me something you like. His family lives in South Dakota but his spouse desires them to transfer. Supervising is my profession. It's not a common thing but what she likes performing is foundation leaping and now she is trying to earn money with it.<br><br>My weblog - over the counter std test - [http://www.siccus.net/blog/15356 click through the next website], |
| Premelting shows its effects in e.g. [[frost heave]], the growth of [[snowflake]]s and, taking grain boundary interfaces into account, maybe even in the movement of [[glaciers]].
| |
| Considering a solid-vapour interface, complete and incomplete premelting can be distinguished. During a temperature rise from below to above <math> T_m </math>, in the case of complete premelting, the solid melts homogeneously from the outside to the inside; in the case of incomplete premelting, the liquid film stays very thin during the beginning of the melting process, but droplets start to form on the interface. In either case, the solid always melts from the outside inwards, never from the inside.
| |
| | |
| ==History==
| |
| The first to mention premelting might have been [[Michael Faraday]] in 1842 for ice surfaces. He compared the effect which holds a snowball together to that which makes buildings from moistured sand stable. Another interesting thing he mentioned is that two blocks of ice can freeze together. Later Tammann and Stranski suggested that all surfaces might, due to the reduction of surface energy, start melting at their surfaces. Frenkel strengthened this by noting that, in contrast to liquids no overheating can be found for solids. After extensive studies on many materials it can be concluded that it is a common attribute of the solid state that the melting process begins at the surface.<ref name=Da>{{cite journal |last=Dash |first=J.G. |title=The physics of premelted ice and its geophysical consequences |journal=Rev Mod Phys |volume=78 |year=2006 |pages=695 |doi=10.1103/RevModPhys.78.695 |last2=Rempel |first2=A. |last3=Wettlaufer |first3=J. |bibcode=2006RvMP...78..695D |issue=3}}</ref>
| |
| | |
| ==Theoretical explanations==
| |
| There are several ways to approach the topic of premelting the most figurative way might be thermodynamically. A more detailed or abstract view on what physics is important for premelting is given by the Lifshitz and the Landau theories.
| |
| One always starts with looking at a crystalline solid phase (fig. 1: (1) solid) and another phase. This second phase (fig. 1: (2)) can either be [[vapour]], [[liquid]] or [[solid]]. Further it can consist of the same chemical material or another. In the case of the second phase being a solid of the same chemical material one speaks of grain boundaries. This case is very important when looking at polycrystalline materials.
| |
| | |
| === Thermodynamical picture for solid gas interface===
| |
| [[Image:Premelting1.JPG|thumb|300px|right|Boundary between phase (1) and phase (2) without and with intermediate phase (3)]]
| |
| In the following thermodynamical equilibrium is assumed, as well as for simplicity (2) should be a vaporous phase.
| |
| | |
| The first (1) and the second (2) phase are always divided by some form of interface, what results in an [[surface energy|interfacial energy]] <math> \gamma_{1-2} </math>. One can now ask whether this energy can be lowered by inserting a third phase (l) in between (1) and (2). Written in interfacial energies this would mean:
| |
| {|
| |
| |-
| |
| |<math> \gamma_{1-2} > \gamma_{1-l} + \gamma_{l-2} </math>
| |
| |}
| |
| If this is the case then it is more efficient for the system to form a separating phase (3). The only possibility for the system to form such a layer is to take material of the solid and "melt" it to a quasi-liquid. In further notation there will be no distinction between quasi-liquid and liquid but one should always keep in mind that there is a difference. This difference to a real liquid becomes clear when looking at a very thin layer (l). As, due to the long range forces of the molecules of the solid material the liquid very near the solid still "feels" the order of crystalline solid and hence itself is in a state providing a not liquid like amount of order. As considering a very thin layer at the moment it is clear that the whole separating layer (l) is to well ordered for a liquid. Further comments on ordering can be found in the paragraph on [[Landau theory]].
| |
| | |
| Now, looking closer at the thermodynamics of the newly introduced phase (l), its [[Gibbs free energy]] can be written as:
| |
| {|
| |
| |-
| |
| |<math> G \left(T,P,d\right)= \left( n_{l}\mu_{l}\left(T,P\right) \right)d + \gamma_{total}\left(d\right) </math>
| |
| |}
| |
| Were <math>T</math> is the temperature, <math>P</math> the pressure, <math>d</math> the thickness of (l) corresponding to the number or particles <math>N</math> in this case. <math>n_{l}</math> and <math>\mu_{l}</math> are the atomic density and the chemical potential in (l) and <math>\gamma_{total}=\gamma_{1-l} + \gamma_{l-2} </math>. Note that one has to consider that the interfacial energies can just be added to the Gibbs free energy in this case. As noted before <math>d</math> corresponds <math>N</math> so the derivation to <math>d</math> results in:
| |
| {|
| |
| |-
| |
| |<math> \mu \left(T,P,d\right)= mu_{l}\left(T,P\right) + \frac{\Delta \gamma}{n_{l}} \frac{\partial f\left(d\right)}{\partial d} = \mu_{1} </math>
| |
| |}
| |
| Where <math>\gamma_{total}= \Delta \gamma_{1-l} \cdot f\left(d\right) + \gamma_{1-2} </math>. Hence <math> \mu_{1} </math> and <math> \mu_{l} </math> differ and <math> \Delta \mu= \mu_{1} - \mu_{l} </math> can be defined. Assuming that a Taylor expansion around the melting point <math> \left(T_m,P_m\right) </math> is possible and using the Clausius-Clapeyron equation one can get the following results:
| |
| * For a long range potential assuming <math> f\left(d\right)=1- \sigma^2/d^2 </math> and <math> d >> \sigma </math>:
| |
| <math> \left(d= -\frac{2 \sigma^{2} \Delta \gamma}{n_{l} q_{m} t}\right)^{1/3} </math>
| |
| | |
| *For short range potential of the form <math> \frac{\partial f}{\partial d} ~ e^{-d/d_{0}} </math>:
| |
| <math> d \propto \left| ln \left|t\right| \right| </math>
| |
| | |
| Where <math> \sigma </math> is in the order of molecular dimensions <math> q_{m} </math> the specific melting heat and <math> t= \frac{T-T_{m}}{T_{m}} </math>
| |
| | |
| These formulas also show that the more the temperature increases, the more increases the thickness of the premelt as this is energetically advantageous. This is the explanation why no [[overheating]] exists for this type of phase transition.<ref name=Da/>
| |
| | |
| ===Lifshitz Theory: Complete and incomplete premelting===
| |
| With the help of the [[Evgeny Lifshitz|Lifshitz]] Theory on Casimir, respectively van der Waals, interactions of macroscopic bodies premelting can be viewed from an electrodynamical perspective.
| |
| A good example for determining the difference between complete and incomplete premelting is ice. From [[UV|VUV]] frequencies on the polarizability of ice is greater than that of water, at lower frequencies this is vice versa. Assuming there is already a film of thickness d on the solid it is easy for any components for electromagnetic waves to travel through the film in the direction perpendicular to the solid surface as long d is small. Hence as long as the film is thin compared to the frequency interaction from the solid to the whole film is possible. But when d gets large against typical VUV frequencies the electronic structure of the film will be too slow to promote the high frequencies to the other end of the liquid phase. Thus this end of the liquid phase feels only a retarded van der Waals interaction from the solid phase. Hence the attraction between the liquid molecules themselves will outweigh and they will start forming droplets instead to thicken the film further. So the speed of light limits complete premelting.
| |
| This makes it a question of solid and surface free energies whether complete premelting occurs. Complete surface melting will occur when <math> \gamma_{total}\left(d\right) </math> is monotonically decreasing. If <math> \gamma_{total}\left(d\right) </math> instead shows a global minimum at finite d than the premelting will be incomplete.
| |
| This implies: When the long range interactions in the system are attractive than there will be incomplete premelting - assuming the film thickness is larger than any repulsive interactions. Is the film thickness small compared to the range of the repulsive interactions present and the repulsive interactions are stronger than the attractive ones than complete premelting can occur.
| |
| For [[van der Waals interactions]] Lifshitz theory can now calculate which type of premelting should occur for a special system. In fact small differences in systems can affect the type of premelting. For example ice in an atmosphere of water vapour shows incomplete premelting, whereas the premelting of ice in air is complete.
| |
| | |
| For solid - solid interfaces it cannot be predicted in general whether the premelting is complete or incomplete when only considering van der Waals interactions. Here other types of interactions become very important. This also accounts for grain boundaries.<ref name=Da/>
| |
| | |
| ===Landau Theory===
| |
| [[Image:Premelting2.JPG|thumb|250px|right|A qualitative picture of the order parameter of a premelting solid for temperatures below the melting point. One can see that there is still a high amount of order in the liquid, which decreases with rising Temperature]]
| |
| Most insight in the problem probably emerges when approaching the effect form Landau Theory. Which is a little bit problematic as the melting of a bulk in general has to be considered as a first order phase transition, meaning the order parameter <math> \eta </math> jumps at <math> t= 0 </math>. The derivation of Lipowski (basic geometry shown in fig.2) leads to the following results when <math> T \leq T_{m} </math>:
| |
| <math>
| |
| \eta_{0} \propto \begin{cases}
| |
| const. & \text{, }a < \sqrt{a_{m}} \\
| |
| \left|t\right|^{1/4} & \text{, }a = \sqrt{a_{m}} \\
| |
| \left|t\right|^{1/2} & \text{, }a > \sqrt{a_{m}}
| |
| \end{cases}
| |
| </math>
| |
| | |
| Where <math> \eta_{0} </math> is the order parameter at the border between (2) and (l), <math> 1/a </math> the so called extrapolation length and <math> a_{m} </math> a constant that enters the model and has to be determined using experiment and other models. Hence one can see that the order parameter in the liquid film can undergo a continuous phase transition for large enough extrapolation length. A further result is that <math> d \propto \left| ln \left|t\right| \right|</math> what corresponds to the result of the thermodynamical model in the case of short range interactions.
| |
| Landau Theory does not consider fluctuations like capillary waves, this could change the results qualitatively.<ref name=Li>{{cite journal |last=Lipowski |first=R. |title=Critical Surface Phenomena at First-Order Bulk Transitions |journal=Phys. Rev. Lett. |volume=49 |year=1982 |pages=1575 |doi=10.1103/PhysRevLett.49.1575 |bibcode=1982PhRvL..49.1575L |issue=21}}</ref>
| |
| | |
| ==Experimental proof for premelting==
| |
| [[Image:Premelting3.JPG|thumb|250px|right|Shadowing and blocking diffraction experiment to show the occurrence of premelting. The incident beam follows a crystal direction, so does the angle under which the detector is. The disorder of the quasi liquid premelt changes the scattering spectrum.]]
| |
| There are several techniques to prove the existence of a liquid layer on a well ordered surface. Basically it is all about showing that there is a phase on top of the solid which has hardly any order (quasi-liquid, see fig. order parameter). One possibility was done by Frenken and van der Veen using proton scattering on a lead (Pb) single crystal (110) surface. First the surface was atomically cleaned in [UHV], because one obviously has to have a very well ordered surface for such experiments. Than they did proton shadowing and blocking measurements. An ideal shadowing and blocking measurements results in an energy spectrum of the scattered protons that shows only a peak for the first surface layer and nothing else. Due to the non ideality of the experiment the spectrum also shows effects of the underlying layers. That means the spectrum is not one well defined peak but has a tail to lower energies due to protons scattered on deeper layers which results in losing energies because of stopping.
| |
| This is different for a liquid film on the surface: This film does hardly (to the meaning of hardly see Landau theory) have any order. So the effects of shadowing and blocking vanish what means all the liquid film contributes the same amount of scattered electrons to the signal. Therefore the peak does not only have a tail, but also becomes broadened.
| |
| During their measurements Frenken and van der Veen raised the temperature to the melting point and hence could show that with increasing temperature a disordered film formed on the surface in equilibrium with a still well ordered Pb crystal.
| |
| <ref name=Fr>{{cite journal |last=Frenken |first=J.W.M. c|title=Observation of Surface Melting |journal=Phys. Rev. Lett.|volume=54 |year=1985 |pages=134–137 |doi=10.1103/PhysRevLett.54.134 |pmid=10031263 |last2=Van Der Veen |first2=JF |issue=2 |bibcode=1985PhRvL..54..134F}}</ref>
| |
| | |
| ==Curvature, disorder and impurities==
| |
| Till now and ideal surface was considered but there are several effects which influence premelting:
| |
| | |
| *''Curvature'': When the surface considered is not planar but exhibits a curvature premelting is effected. The rule is that whenever the surface is concave, viewed from the solid's perspective, then premelting is advanced. The fraction by which the thickness of the liquid film increases is given by: <math> \frac{\delta d}{d}= \frac{2 \gamma_{1-l}}{3 p_{l} q_{m} t r} </math> Where r is the local radius of the curved surface. Therefore it is also plausible that premelting starts in scratches or in corners of steps and hence has a flattening effect.
| |
| *''Disordered solids'': As disorder in the solid increases its local free energy. The local chemical potential of the disordered solid lies above the chemical potential of the ordered solid. As in thermodynamic equilibrium the chemical potential of the premelted liquid film has to be equal to that of the disordered solid. It can be concluded that disorder in the solid phase causes the effect of premelting to increase.
| |
| *''Impurities'': Every winter again the melting point of ice is lowered with the help of salt. For premelting the situation is far more difficult than one would expect from that simple statement. It starts with the Lifshitz Theory which was roughly sketched above. But now the impurities cause screening in the liquid, they adsorb on the border between solid and liquid phase and all those effects make a general derivation of impurity effects impossible to state here. But it can be said that impurities have a great effect on the Temperature from which on premelting can be observed and they especially affect the thickness of the layer. What does not mean that the thickness is a monotone function in the concentration.<ref name=Da/>
| |
| | |
| ==Ice skating==
| |
| It should be noted first that the [[friction coefficient]] for ice, without a liquid film on the surface was measured to be <math> \mu= 0.6 </math>.<ref name=Bl>{{cite journal |last=Bluhm |first=H. | coauthors = T. Inoue; M. Salmeron |title= Friction of ice measured using lateral force microscopy |journal=Phys. Rev. B |volume=61 |year=2000 |pages=7760 |doi=10.1103/PhysRevB.61.7760|bibcode = 2000PhRvB..61.7760B |issue=11 }}</ref> Friction coefficients for ice skaters are around or below 0.005.<ref name=Ko>{{cite journal |last=De Koning |first=J.J. | coauthors = G. De Groot; G.J. Van Ingen Schenau |title=ICE FRICTION DURING SPEED SKATING |journal=J Biomech |volume=25 |year=1992 |pages=565–71 |doi=10.1016/0021-9290(92)90099-M |pmid=1517252 |issue=6}}</ref> So there is a need for a water film on the ice surface in order to explain the small friction appearing in ice skating. Three possible mechanisms could account for a film of liquid water on the ice surface:
| |
| * Pressure: Because of the abnormality water ice can be melted by raising the pressure in the system
| |
| * Premelting: Due to premelting there is always a thin film of liquid water on the ice surface
| |
| * Friction: The sliding on the surface causes heat and melts the ice to a liquid water film
| |
| To make it clear before: Until now scientific community is not sure which mechanism makes ice skating possible. And it could easily be that all three effects play a role but people want to know whether one effect could it all do on its own.
| |
| For several decades it was common to explain the low friction of the skates on ice by pressure melting. But till today several arguments were found which contradict this thesis. The strongest argument against pressure melting as the only effect responsible for the low friction on ice is that ice skating is still possible below temperatures of -20 °C under which ice can not be melted due to pressure anymore (see phase diagram). But pressure below about 0.2 GPa could still result in a lowering of the melting temperature.
| |
| <ref name=Co>{{cite journal |last=Colbeck |first=S.C. |title=Pressure melting and ice skating |journal=Am J Phys |volume=63 |year=1995 |pages=888 |doi=10.1119/1.18028|bibcode = 1995AmJPh..63..888C |issue=10 }}</ref> | |
| Nowadays scientists mostly look for the origin of the water film in the two later effects and there are again arguments in favour or against the one or the other.
| |
| The thickness of the film is an argument which is all in favour of the friction argument, as these thicknesses could reach the orders of <math> \mu m </math> whereas film thickness due to premelting at lower temperatures, e.g. -10 °C, is in the orders of nm.
| |
| De Koning et al. found in their measurements that the adding of impurities to the ice can lower the friction coefficient in orders of 15%. When assuming that impurities do not play such a big role for friction melting, this indicates that a film of premelted water could play a certain role in ice skating. On the contrary they found that the friction coefficient increases with skating speed what would not support the friction argument, but could also be due to a different skating technique at higher speeds.<ref name=Ko/>
| |
| This is not the end of the story as there are several more arguments in favour or against premelting or friction. But one can summarize that the main problem of the premelting argument is the thin layer it provides. On the other hand one could say that 0.6 is a friction coefficient comparable to rubber and bitumen (roughly 0.8). Hence the question is whether one needs as much force to push a resting ice skater as pushing a resting normal person.
| |
| | |
| ==See also==
| |
| *[[Wetting]]
| |
| *[[Surface freezing]]
| |
| | |
| ==References==
| |
| {{reflist}}
| |
| | |
| *{{cite journal|author=Dimanov, A.; Ingrin, J.|title=Premelting and high-temperature diffusion of Ca in synthetic diopside: An increase of cation mobility|journal=[[Physics and Chemistry of Minerals]]|volume=22|year=1995|pages=437–442|doi=10.1007/BF00200321|bibcode=1995PCM....22..437D|issue=7}}.
| |
| | |
| ==External links==
| |
| * [http://phycomp.technion.ac.il/~phsorkin/thesis/node9.html] Surface melting, Israel Institute of Technology
| |
| * [http://www.lowtem.hokudai.ac.jp/ptdice/english/aletter.html] Pattern of Snowflakes, Hokkaido University
| |
| * [http://www.physicstoday.org/vol-58/iss-12/p50.shtml] Robert Rosenberg: ''Why is Ice Slippery?''; Physics Today, December 2005 (requires subscription)
| |
| * [http://www.nytimes.com/2006/02/21/science/21ice.html] Kenneth Chang: ''Explaining Ice: The Answers Are Slippery''; The New York Times, February 21, 2006 (requires subscription)
| |
| | |
| [[Category:Phases of matter]]
| |