|
|
| Line 1: |
Line 1: |
| {{Other uses|Antenna (disambiguation){{!}}Antenna}}
| | Conventional wisdom is the fact that it really is fairly hard to get rid of fat, nevertheless that's not true if you know how to go about doing this. It is important to learn all which is mandatory to lose weight to help yourself attain the goal more easily. Continue reading this article to learn about how to approach losing fat.<br><br>So, again, back to the all-natural aspect; most folks have found [http://safedietplans.com diet plan] effectively is changing a usual food with natural replacements. These are clearly marked; usually not containing pesticides, artificial flavoring, or preservatives. Doctors might tell you that organic is the path to take, however certain people create the mistake of thinking they may simply gorge themselves on organic food and everything will be fine. That's no method to follow, even diets that function.<br><br>It does not matter how little the weight reduction is. When it comes to diet plans, if you find 1 which provides we a result then you've got a winner. stay with it!<br><br>Here are two sample menus: Menu 1 Breakfast: Oatmeal, soy milk, 1 apple and a cup of tea. Lunch: Green salad, tomato salad, grated carrots, and a glass of almond milk. The mid-afternoon snack is a strawberry plus banana smoothie. Supper: Vegetable soup, vegetable couscous, plus kiwis for dessert.<br><br>These days, it's difficult not to feel like you should lose fat because everywhere we turn, some news media outlet is spouting fat loss tips plus tips. The problem with diets is that they don't work. Typically speaking, most diet menu plans rapidly cut all junk food and sodas out. The "bad" food is pulled out of the refrigerator, the freezer and the pantry and tossed away. Then the exercising starts and many folks pray for a fast plus painless weight loss.<br><br>No 1: Tips for following the Team Beachbody Insanity Diet/Elite Nutrition Plan: Eat five meals a day with approximately the same amount of calories. I liked the idea of eating five food a day because opposed to six. Jenny Craig suggests eating six occasions a day, however, certain experts such as Jillian Michaels suggests grazing too frequently could backfire.<br><br>Of course you are able to follow the 3 day eating plan if you like because an emergency measure and you'll certainly lose weight but it is all water. The moment you start eating normally again you'll put all of the weight back on. However, if you have an occasion to attend plus you desperately should shed a few pounds inside a limited days it may be worth considering. |
| {{Refimprove|date=January 2014}}
| |
| | |
| {{Antennas}}
| |
| | |
| [[File:Car radio antenna extended portrait.jpeg|thumb|150px|right|[[Whip antenna]] on car]]
| |
| | |
| [[File:Felder um Dipol.jpg|thumb|150px|right|Diagram of the [[electric field]]s ''<span style="color:blue;">(blue)</span>'' and [[magnetic field]]s ''<span style="color:red;">(red)</span>'' radiated by a [[dipole antenna]] ''(black rods)'' during transmission.]]
| |
| | |
| [[File:Canberra Deep Dish Communications Complex - GPN-2000-000502.jpg|thumb|150px|right|Large [[parabolic antenna]] for communicating with spacecraft]]
| |
| | |
| [[File:Antenna.jpg|thumb|150px|right|Rooftop [[television antenna]]s in Israel. [[Yagi-Uda antenna]]s like these six are widely used at [[Very High Frequency|VHF]] and [[Ultrahigh frequency|UHF]] frequencies.]]
| |
| | |
| [[File:AntennaSymbol.png|100px|thumb|Electronic symbol for an antenna]]
| |
| | |
| An '''antenna''' (or '''aerial''') is an electrical device which converts [[electric power]] into [[radio wave]]s, and vice versa.<ref name="Graf">{{cite book
| |
| | last = Graf
| |
| | first = Rudolf F.
| |
| | title = Modern Dictionary of Electronics
| |
| | publisher = Newnes
| |
| | year = 1999
| |
| | location =
| |
| | pages = 29
| |
| | url = http://books.google.com/books?id=uah1PkxWeKYC&pg=PA29
| |
| | doi =
| |
| | id =
| |
| | isbn = 0750698667}}</ref> It is usually used with a [[transmitter|radio transmitter]] or [[receiver (radio)|radio receiver]]. In [[Transmission (telecommunications)|transmission]], a radio transmitter supplies an oscillating [[radio frequency]] electric current to the antenna's terminals, and the antenna radiates the energy from the current as [[electromagnetic radiation|electromagnetic wave]]s (radio waves). In reception, an antenna intercepts some of the power of an electromagnetic wave in order to produce a tiny voltage at its terminals, that is applied to a receiver to be [[Amplifier|amplified]].
| |
| | |
| Antennas are essential components of all equipment that uses [[radio]]. They are used in systems such as [[radio broadcasting]], [[broadcast television]], [[two-way radio]], [[communications receiver]]s, [[radar]], [[cell phone]]s, and [[satellite communications]], as well as other devices such as [[garage door opener]]s, [[wireless microphone]]s, [[bluetooth]] enabled devices, [[wireless LAN|wireless computer network]]s, [[baby monitor]]s, and [[RFID tag]]s on merchandise.
| |
| | |
| Typically an antenna consists of an arrangement of metallic [[conductor (material)|conductor]]s ([[Driven element|element]]s), electrically connected (often through a [[transmission line]]) to the receiver or transmitter. An oscillating current of [[electron]]s forced through the antenna by a transmitter will create an oscillating [[magnetic field]] around the antenna elements, while the [[electric charge|charge]] of the electrons also creates an oscillating [[electric field]] along the elements. These time-varying fields radiate away from the antenna into space as a moving transverse electromagnetic field wave. Conversely, during reception, the oscillating electric and magnetic fields of an incoming radio wave exert force on the electrons in the antenna elements, causing them to move back and forth, creating oscillating currents in the antenna.
| |
| | |
| Antennas may also include reflective or directive elements or surfaces not connected to the transmitter or receiver, such as [[passive radiator|parasitic elements]], [[Parabolic antenna|parabolic reflector]]s or [[Horn antenna|horns]], which serve to direct the radio waves into a beam or other desired [[radiation pattern]]. Antennas can be designed to transmit or receive radio waves in all directions equally ([[omnidirectional antenna]]s), or transmit them in a beam in a particular direction, and receive from that one direction only ([[Directional antenna|directional]] or [[High gain antenna|high gain]] antennas).
| |
| | |
| The first antennas were built in 1888 by German physicist [[Heinrich Hertz]] in his pioneering experiments to prove the existence of electromagnetic waves predicted by the theory of [[James Clerk Maxwell]]. Hertz placed [[dipole antenna]]s at the focal point of [[parabolic reflector]]s for both transmitting and receiving. He published his work in ''[[Annalen der Physik und Chemie]]'' (vol. 36, 1889).
| |
| | |
| == Terminology ==
| |
| The words ''antenna'' (plural: ''antennas''<ref>In the context of [[electrical engineering]] and [[physics]], the plural of ''antenna'' is ''antennas'', and it has been this way since about 1950 (or earlier), when a cornerstone textbook in this field, ''Antennas'', was published by the physicist and electrical engineer [[John D. Kraus]] of [[The Ohio State University]]. Besides in the title, Dr. Kraus noted this in a footnote on the first page of his book. [[Insect]]s may have "[[Antenna (biology)|antennae]]", but this form is not used in the context of [[electronics]] or [[physics]].</ref> in US English, although both "antennas" and "antennae" are used in International English<ref>For example http://www.telegraph.co.uk/science/science-news/7810454/British-scientists-launch-major-radio-telescope.html; http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf09377.html; http://www.ska.ac.za/media/meerkat_cad.php</ref>) and ''aerial'' are used interchangeably. Occasionally a rigid metallic structure is called an "antenna" while the wire form is called an "aerial". However, note the important international [[scientific journal|technical journal]], the ''[[IEEE Transactions on Antennas and Propagation]]''.<ref>http://ieeexplore.ieee.org/xpl/RecentIssue.jsp?reload=true&punumber=8</ref>
| |
| In the [[United Kingdom]] and other areas where [[British English]] is used, the term aerial is sometimes used although 'antenna' has been universal in professional use for many years.
| |
| | |
| The origin of the word ''antenna'' relative to wireless apparatus is attributed to Italian radio pioneer [[Guglielmo Marconi]]. In 1895, while testing early radio apparatus in the [[Swiss Alps]] at [[Salvan, Switzerland]] in the [[Mont Blanc]] region, Marconi experimented with long wire "aerials". He used a 2.5 meter vertical pole, with a wire attached to the top running down to the transmitter, as a radiating and receiving aerial element. In Italian a tent pole is known as ''l'antenna centrale,'' and the pole with the wire was simply called ''l'antenna.'' Until then wireless radiating transmitting and receiving elements were known simply as aerials or terminals. Because of his prominence, Marconi's use of the word ''antenna'' ([[Italian language|Italian]] for ''pole'') spread among wireless researchers, and later to the general public.<ref>'' "Salvan: Cradle of Wireless, How Marconi Conducted Early Wireless Experiments in the Swiss Alps", Fred Gardiol & Yves Fournier, Microwave Journal, February 2006, pp. 124-136.''</ref>
| |
| | |
| In common usage, the word ''antenna'' may refer broadly to an entire assembly including support structure, enclosure (if any), etc. in addition to the actual functional components. Especially at microwave frequencies, a receiving antenna may include not only the actual electrical antenna but an integrated preamplifier or [[frequency mixer|mixer]].
| |
| | |
| <gallery>
| |
| File:One of the two ALMA transporters, Lore.jpg|One of the 7-metre-diameter antennas of the [[Atacama Large Millimeter Array]].<ref>{{cite news|title=Lore on the Move|url=http://www.eso.org/public/images/potw1318a/|accessdate=6 May 2013|newspaper=ESO Picture of the Week}}</ref>
| |
| File:Rabbit-ears dipole antenna with UHF loop 20090204.jpg|"Rabbit ears" [[dipole antenna]] for television reception
| |
| File:6 sector site in CDMA.jpg|[[Cell phone]] [[Cellular base station|base station]] antennas
| |
| File:Westnet wireless cellsite.JPG|[[Wi-Fi]] WestNet Wi-Fi base station antennas in [[Calgary, Alberta]]
| |
| File:TV antenna.JPG|[[Parabolic antenna]] by Himalaya Television [[Nepal]]
| |
| File:Bundesarchiv Bild 183-29802-0001, MTS Strehla, Bezirk Dresden, Ukw-Sprechfunk.jpg|[[Yagi antenna]] used for mobile military communications station, Dresden, Germany, 1955
| |
| File:Superturnstile Tx Muehlacker.JPG|[[Turnstile antenna|Turnstile]] type transmitting antenna for VHF low band television broadcasting station, Germany.
| |
| File:Folded dipole.jpg|[[Folded dipole]] antenna
| |
| File:Antenna visalia california.jpg|Large Yagi antenna used by [[amateur radio]] hobbyists
| |
| File:2008-07-28 Mast radiator.jpg|A [[mast radiator]] antenna for an [[AM radio]] station in [[Chapel Hill, North Carolina]]
| |
| | |
| </gallery>
| |
| | |
| ==Overview==
| |
| | |
| {{Unreferenced section|date=January 2014}}
| |
| | |
| [[File:The Atacama Large Millimeter submillimeter Array (ALMA) by night under the Magellanic Clouds.jpg|thumb|Antennas of the [[Atacama Large Millimeter Array|Atacama Large Millimeter submillimeter Array]].<ref>{{cite news|title=Media Advisory: Apply Now to Attend the ALMA Observatory Inauguration|url=http://www.eso.org/public/announcements/ann12092/|accessdate=4 December 2012|newspaper=ESO Announcement}}</ref> ]]
| |
| | |
| Antennas are required by any radio receiver or transmitter to couple its electrical connection to the electromagnetic field. [[Radio]] waves are [[electromagnetic waves]] which carry signals through the air (or through space) at the [[speed of light]] with almost no [[absorption (electromagnetic radiation)|transmission loss]]. Radio transmitters and receivers are used to convey signals (information) in systems including broadcast (audio) radio, [[television]], [[mobile telephones]], [[wi-fi]] ([[WLAN]]) data networks, [[Trunking|trunk lines]] and point-to-point communications links (telephone, data networks), satellite links, many [[remote controlled]] devices such as [[garage door opener]]s, and wireless remote sensors, among many others. Radio waves are also used directly for measurements in technologies including [[RADAR]], [[GPS]], and [[radio astronomy]]. In each and every case, the transmitters and receivers involved require antennas, although these are sometimes hidden (such as the antenna inside an AM radio or inside a laptop computer equipped with wi-fi).
| |
| | |
| According to their applications and technology available, antennas generally fall in one of two categories:
| |
| # [[Omnidirectional antenna|Omnidirectional]] or only weakly directional antennas which receive or radiate more or less in all directions. These are employed when the relative position of the other station is unknown or arbitrary. They are also used at lower frequencies where a directional antenna would be too large, or simply to cut costs in applications where a directional antenna isn't required.
| |
| # [[Directional antenna|Directional]] or ''beam'' antennas which are intended to preferentially radiate or receive in a particular direction or directional pattern.
| |
| | |
| In common usage "omnidirectional" usually refers to all horizontal directions, typically with reduced performance in the direction of the sky or the ground (a truly [[isotropic]] radiator is not even possible). A "directional" antenna usually is intended to maximize its coupling to the electromagnetic field in the direction of the other station, or sometimes to cover a particular sector such as a 120° horizontal fan pattern in the case of a panel antenna at a [[cell site]].
| |
| | |
| One example of omnidirectional antennas is the very common ''vertical antenna'' or [[whip antenna]] consisting of a metal rod (often, but not always, a quarter of a wavelength long). A [[dipole antenna]] is similar but consists of two such conductors extending in opposite directions, with a total length that is often, but not always, a half of a wavelength long. Dipoles are typically oriented horizontally in which case they are weakly directional: signals are reasonably well radiated toward or received from all directions with the exception of the direction along the conductor itself; this region is called the antenna blind cone or null.
| |
| | |
| [[File:Half – Wave Dipole.jpg|thumb|150px|right|Half-wave [[dipole antenna]]]]
| |
| | |
| Both the vertical and dipole antennas are simple in construction and relatively inexpensive. The dipole antenna, which is the basis for most antenna designs, is a [[balanced]] component, with equal but opposite voltages and currents applied at its two terminals through a [[Balanced line|balanced transmission line]] (or to a coaxial transmission line through a so-called [[balun]]). The vertical antenna, on the other hand, is a ''monopole'' antenna. It is typically connected to the inner conductor of a [[Coaxial cable|coaxial transmission line]] (or a matching network); the shield of the transmission line is connected to [[Ground (electricity)|ground]]. In this way, the ground (or any large conductive surface) plays the role of the second conductor of a dipole, thereby forming a [[Circuit theory#Open circuit vs. closed circuit|complete circuit]]. Since monopole antennas rely on a conductive ground, a so-called [[ground (electricity)|ground]]ing structure may be employed to provide a better ground contact to the earth or which itself acts as a [[ground plane]] to perform that function regardless of (or in absence of) an actual contact with the earth.
| |
| | |
| Antennas more complex than the dipole or vertical designs are usually intended to increase the directivity and consequently the gain of the antenna. This can be accomplished in many different ways leading to a plethora of antenna designs. The vast majority of designs are fed with a balanced line (unlike a monopole antenna) and are based on the dipole antenna with additional components (or ''elements'') which increase its directionality. Antenna "gain" in this instance describes the concentration of radiated power into a particular solid angle of space, as opposed to the spherically uniform radiation of the ideal radiator. The increased power in the desired direction is at the expense of that in the undesired directions. Power is conserved, and there is no net power increase over that delivered from the power source (the transmitter.)
| |
| | |
| For instance, a [[phased array]] consists of two or more simple antennas which are connected together through an electrical network. This often involves a number of parallel dipole antennas with a certain spacing. Depending on the relative [[Phase (waves)|phase]] introduced by the network, the same combination of dipole antennas can operate as a "broadside array" (directional normal to a line connecting the elements) or as an "end-fire array" (directional along the line connecting the elements). Antenna arrays may employ any basic (omnidirectional or weakly directional) antenna type, such as dipole, loop or slot antennas. These elements are often identical.
| |
| | |
| However a [[Log-periodic antenna|log-periodic dipole array]] consists of a number of dipole elements of ''different'' lengths in order to obtain a somewhat directional antenna having an extremely wide bandwidth: these are frequently used for television reception in fringe areas. The dipole antennas composing it are all considered "active elements" since they are all electrically connected together (and to the transmission line). On the other hand, a superficially similar dipole array, the [[Yagi-Uda Antenna]] (or simply "Yagi"), has only one dipole element with an electrical connection; the other so-called [[passive radiator|parasitic elements]] interact with the electromagnetic field in order to realize a fairly directional antenna but one which is limited to a rather narrow bandwidth. The Yagi antenna has similar looking parasitic dipole elements but which act differently due to their somewhat different lengths. There may be a number of so-called "directors" in front of the active element in the direction of propagation, and usually a single (but possibly more) "reflector" on the opposite side of the active element.
| |
| | |
| Greater directionality can be obtained using beam-forming techniques such as a [[parabolic reflector]] or a horn. Since the size of a directional antenna depends on it being large compared to the wavelength, very directional antennas of this sort are mainly feasible at UHF and microwave frequencies. On the other hand, at low frequencies (such as AM broadcast) where a practical antenna must be much smaller than a wavelength, significant directionality isn't even possible. A vertical antenna or [[loop antenna#Small loops|loop antenna]] small compared to the wavelength is typically used, with the main design challenge being that of [[impedance matching]]. With a vertical antenna a ''loading coil'' at the base of the antenna may be employed to cancel the [[electrical reactance|reactive component of impedance]]; [[Loop antenna#Small loops|small loop antennas]] are tuned with parallel capacitors for this purpose.
| |
| | |
| An antenna lead-in is the [[transmission line]] (or ''[[feed line]]'') which connects the antenna to a transmitter or receiver. The ''[[antenna feed]]'' may refer to all components connecting the antenna to the transmitter or receiver, such as an [[impedance matching]] network in addition to the transmission line. In a so-called aperture antenna, such as a horn or parabolic dish, the "feed" may also refer to a basic antenna inside the entire system (normally at the focus of the parabolic dish or at the throat of a horn) which could be considered the one active element in that antenna system. A microwave antenna may also be fed directly from a [[waveguide]] in lieu of a (conductive) [[transmission line]].
| |
| | |
| An antenna [[Counterpoise (ground system)|counterpoise]] or [[ground plane]] is a structure of conductive material which improves or substitutes for the ground. It may be connected to or insulated from the natural ground. In a monopole antenna, this aids in the function of the natural ground, particularly where variations (or limitations) of the characteristics of the natural ground interfere with its proper function. Such a structure is normally connected to the return connection of an unbalanced transmission line such as the shield of a [[coaxial cable]].
| |
| | |
| An electromagnetic wave ''refractor'' in some aperture antennas is a component which due to its shape and position functions to selectively delay or advance portions of the electromagnetic wavefront passing through it. The refractor alters the spatial characteristics of the wave on one side relative to the other side. It can, for instance, bring the wave to a focus or alter the wave front in other ways, generally in order to maximize the directivity of the antenna system. This is the radio equivalent of an [[optical lens]].
| |
| | |
| An antenna coupling network is a passive network (generally a combination of inductive and capacitive circuit elements) used for [[impedance matching]] in between the antenna and the transmitter or receiver. This may be used to improve the [[standing wave ratio]] in order to minimize losses in the transmission line and to present the transmitter or receiver with a standard resistive impedance that it expects to see for optimum operation.
| |
| | |
| ==Reciprocity==
| |
| It is a fundamental property of antennas that the electrical characteristics of an antenna described in the next section, such as [[Antenna gain|gain]], [[radiation pattern]], [[Electrical impedance|impedance]], [[Bandwidth (signal processing)|bandwidth]], [[resonant frequency]] and [[Polarization (waves)|polarization]], are the same whether the antenna is [[Transmitter|transmitting]] or [[Radio receiver|receiving]].<ref name="Lonngren">{{cite book
| |
| | last = Lonngren
| |
| | first = Karl Erik ,
| |
| | authorlink =
| |
| | coauthors = Sava V. Savov, Randy J. Jost
| |
| | title = Fundamentals of Electomagnetics With Matlab, 2nd Ed.
| |
| | publisher = SciTech Publishing
| |
| | year = 2007
| |
| | location =
| |
| | pages = 451
| |
| | url = http://books.google.com/books?id=nIgNr5-VMY4C&pg=PA471&dq=antenna+reciprocity+nonreciprocal+ferrite
| |
| | doi =
| |
| | id =
| |
| | isbn = 1891121588}}</ref><ref name="Stutzman">{{cite book
| |
| | last = Stutzman
| |
| | first = Warren L.
| |
| | coauthors = Gary A. Thiele
| |
| | title = Antenna Theory and Design, 3rd Ed.
| |
| | publisher = John Wiley & Sons
| |
| | year = 2012
| |
| | location =
| |
| | pages = 560–564
| |
| | url = http://books.google.com/books?id=xhZRA1K57wIC&pg=RA1-PA564&dq=antenna+reciprocity+nonreciprocal+ferrite
| |
| | doi =
| |
| | id =
| |
| | isbn = 0470576642}}</ref> For example, the "''receiving pattern''" (sensitivity as a function of direction) of an antenna when used for reception is identical to the [[radiation pattern]] of the antenna when it is ''driven'' and functions as a radiator. This is a consequence of the [[reciprocity (electromagnetism)|reciprocity theorem]] of electromagnetics.<ref name="Stutzman" /> Therefore in discussions of antenna properties no distinction is usually made between receiving and transmitting terminology, and the antenna can be viewed as either transmitting or receiving, whichever is more convenient.
| |
| | |
| A necessary condition for the aforementioned reciprocity property is that the materials in the antenna and transmission medium are [[linear function|linear]] and reciprocal. ''Reciprocal'' (or ''bilateral'') means that the material has the same response to an electric current or magnetic field in one direction, as it has to the field or current in the opposite direction. Most materials used in antennas meet these conditions, but some microwave antennas use high-tech components such as [[isolator (microwave)|isolator]]s and [[circulator]]s, made of nonreciprocal materials such as [[Ferrite (iron)|ferrite]].<ref name="Lonngren" /><ref name="Stutzman" /> These can be used to give the antenna a different behavior on receiving than it has on transmitting,<ref name="Lonngren" /> which can be useful in applications like [[radar]].
| |
| | |
| ==Parameters==
| |
| | |
| {{Refimprove section|date=January 2014}}
| |
| | |
| {{main|Antenna measurement}}
| |
| Antennas are characterized by a number of performance measures which a user would be concerned with in selecting or designing an antenna for a particular application. Chief among these relate to the directional characteristics (as depicted in the antenna's ''[[radiation pattern]]'') and the resulting ''[[Antenna gain|gain]]''. Even in omnidirectional (or weakly directional) antennas, the gain can often be increased by concentrating more of its power in the horizontal directions, sacrificing power radiated toward the sky and ground. The antenna's [[Antenna gain|power gain]] (or simply "gain") also takes into account the antenna's efficiency, and is often the primary figure of merit.
| |
| | |
| Resonant antennas are expected to be used around a particular ''[[resonance|resonant frequency]]''; an antenna must therefore be built or ordered to match the frequency range of the intended application. A particular antenna design will present a particular feedpoint [[Electrical impedance|impedance]]. While this may affect the choice of an antenna, an antenna's impedance can also be adapted to the desired impedance level of a system using a [[impedance matching|matching network]] while maintaining the other characteristics (except for a possible loss of efficiency).
| |
| | |
| Although these parameters can be [[antenna measurement|measured]] in principle, such measurements are difficult and require very specialized equipment. Beyond tuning a transmitting antenna using an [[standing wave ratio|SWR]] meter, the typical user will depend on theoretical predictions based on the antenna design or on claims of a vendor.
| |
| | |
| An antenna transmits and receives radio waves with a particular [[polarization (waves)|polarization]] which can be reoriented by tilting the axis of the antenna in many (but not all) cases. The physical size of an antenna is often a practical issue, particularly at lower frequencies (longer wavelengths). Highly directional antennas need to be significantly larger than the wavelength. Resonant antennas use a conductor, or a pair of conductors, each of which is about one quarter of the wavelength in length. Antennas that are required to be very small compared to the wavelength sacrifice efficiency and cannot be very directional. Fortunately at higher frequencies (UHF, microwaves) trading off performance to obtain a smaller physical size is usually not required.
| |
| | |
| ===Resonant antennas===
| |
| While there are [[log periodic antenna|broadband designs]] for antennas, the vast majority of antennas are based on the half-wave [[dipole antenna|dipole]] which has a particular [[resonant frequency]]. At its resonant frequency, the [[wavelength]] (figured by dividing the [[speed of light]] by the resonant frequency) is slightly over twice the length of the half-wave dipole (thus the name). The quarter-wave vertical antenna consists of one arm of a half-wave dipole, with the other arm replaced by a connection to [[Ground (electricity)|ground]] or an equivalent [[ground plane]] (or ''[[counterpoise]]''). A [[Yagi-Uda]] array consists of a number of resonant dipole elements, only one of which is directly connected to the transmission line. The quarter-wave elements of a dipole or vertical antenna imitate a series-resonant electrical element, since if they are driven at the resonant frequency a [[standing wave]] is created with the peak current at the feed-point and the peak voltage at the far end.
| |
| | |
| A common misconception is that the ability of a resonant antenna to transmit (or receive) fails at frequencies far from the resonant frequency. The reason a dipole antenna needs to be used at the resonant frequency has to do with the [[impedance match]] between the antenna and the transmitter or receiver (and its transmission line). For instance, a dipole using a fairly thin conductor<ref>This example assumes a length to diameter ratio of 1000.</ref> will have a purely resistive feedpoint impedance of about 63 ohms at its design frequency. Feeding that antenna with a current of 1 ampere will require 63 volts of RF, and the antenna will radiate 63 watts (ignoring losses) of radio frequency power. If that antenna is driven with 1 ampere at a frequency 20% higher, it will still radiate as efficiently but in order to do that about 200 volts would be required due to the change in the antenna's impedance which is now largely reactive (voltage out of phase with the current). A typical transmitter would not find that impedance acceptable and would deliver much less than 63 watts to it; the transmission line would be operating at a high (poor) [[standing wave ratio]]. But using an appropriate matching network, that large reactive impedance could be converted to a resistive impedance satisfying the transmitter and accepting the available power of the transmitter.
| |
| | |
| This principle is used to construct vertical antennas substantially shorter than the 1/4 wavelength at which the antenna is resonant. By adding an inductance in series with the vertical antenna (a so-called [[loading coil#Radio antenna|loading coil]]) the capacitive reactance of this antenna can be cancelled leaving a pure resistance which can then be matched to the transmission line. Sometimes the resulting resonant frequency of such a system (antenna plus matching network) is described using the construct of "electrical length" and the use of a shorter antenna at a lower frequency than its resonant frequency is termed "[[electrical lengthening]]". For example, at 30 MHz (wavelength = 10 meters) a true resonant monopole would be almost 2.5 meters (1/4 wavelength) long, and using an antenna only 1.5 meters tall would require the addition of a loading coil. Then it may be said that the coil has "lengthened" the antenna to achieve an "electrical length" of 2.5 meters, that is, 1/4 wavelength at 30 MHz where the combined system now resonates. However, the resulting resistive impedance achieved will be quite a bit lower than the impedance of a resonant monopole, likely requiring further impedance matching. In addition to a lower radiation resistance, the reactance becomes higher as the antenna size is reduced, and the resonant circuit formed by the antenna and the tuning coil has a [[Q factor]] that rises and eventually causes the bandwidth of the antenna to be inadequate for the signal being transmitted. This is the major factor that sets the size of antennas at 1 MHz and lower frequencies.
| |
| | |
| ====Current and voltage distribution====
| |
| The antenna conductors have the lowest feed-point impedance at the resonant frequency where they are just under 1/4 wavelength long; two such conductors in line fed differentially thus realizes the familiar "half-wave dipole". When fed with an RF current at the resonant frequency, the quarter wave element contains a [[standing wave]] with the voltage and current largely (but not exactly) in phase quadrature, as would be obtained using a quarter wave stub of transmission line. The current reaches a minimum at the end of the element (where it has nowhere to go!) and is maximum at the feed-point. The voltage, on the other hand, is the greatest at the end of the conductor and reaches a minimum (but not zero) at the feedpoint. Making the conductor shorter or longer than 1/4 wavelength means that the voltage pattern reaches its minimum somewhere beyond the feed-point, so that the feed-point has a higher voltage and thus sees a higher impedance, as we have noted. Since that voltage pattern is almost in phase quadrature with the current, the impedance seen at the feed-point is not only much higher but mainly reactive.
| |
| | |
| It can be seen that if such an element is resonant at ''f<sub>0</sub>'' to produce such a standing wave pattern, then feeding that element with ''3f<sub>0</sub>'' (whose wavelength is 1/3 that of ''f<sub>0</sub>'') will lead to a standing wave pattern in which the voltage is likewise a minimum at the feed-point (and the current at a maximum there). Thus, an antenna element is ''also'' resonant when its length is 3/4 of a wavelength (3/2 wavelength for a complete dipole). This is true for all odd multiples of 1/4 wavelength, where the feed-point impedance is purely resistive, though larger than the resistive impedance of the 1/4 wave element. Although such an antenna is resonant and works perfectly well at the higher frequency, the antenna radiation pattern is also altered compared to the half-wave dipole.
| |
| | |
| The use of a monopole or dipole at odd multiples of the fundamental resonant frequency, however, does ''not'' extend to even multiples (thus a 1/2 wavelength monopole or 1 wavelength dipole). Now the voltage standing wave is at its ''peak'' at the feed-point, while that of the current (which must be zero at the end of the conductor) is at a minimum (but not exactly zero). The antenna is ''anti-resonant'' at this frequency. Although the reactance at the feedpoint can be cancelled using such an element length, the feed-point impedance is very high, and is highly dependent on the diameter of the conductor (which makes only a small difference at the actual resonant frequency). Such an antenna does not match the much lower characteristic impedance of available transmission lines, and is generally not used. However some equipment where transmission lines are not involved which desire a high driving point impedance may take advantage of this anti-resonance.
| |
| | |
| ====Bandwidth====
| |
| Although a resonant antenna has a purely resistive feed-point impedance at a particular frequency, many (if not most) applications require using an antenna over a range of frequencies. An antenna's ''[[bandwidth (signal processing)|bandwidth]]'' specifies the range of frequencies over which its performance does not suffer due to a poor impedance match. Also in the case of a [[Yagi-Uda]] array, the use of the antenna very far away from its design frequency reduces the antenna's directivity, thus reducing the usable bandwidth regardless of impedance matching.
| |
| | |
| Except for the latter concern, the resonant frequency of a resonant antenna can always be altered by adjusting a suitable matching network. To do this efficiently one would require remotely adjusting a matching network at the site of the antenna, since simply adjusting a matching network at the transmitter (or receiver) would leave the transmission line with a poor [[standing wave ratio]].
| |
| | |
| Instead, it is often desired to have an antenna whose impedance does not vary so greatly over a certain bandwidth. It turns out that the amount of reactance seen at the terminals of a resonant antenna when the frequency is shifted, say, by 5%, depends very much on the diameter of the conductor used. A long thin wire used as a half-wave dipole (or quarter wave monopole) will have a reactance significantly greater than the resistive impedance it has at resonance, leading to a poor match and generally unacceptable performance. Making the element using a tube of a diameter perhaps 1/50 of its length, however, results in a reactance at this altered frequency which is not so great, and a much less serious mismatch which will only modestly damage the antenna's net performance. Thus rather thick tubes are typically used for the solid elements of such antennas, including Yagi-Uda arrays.
| |
| | |
| Rather than just using a thick tube, there are similar techniques used to the same effect such as replacing thin wire elements with ''cages'' to simulate a thicker element. This widens the bandwidth of the resonance. On the other hand, amateur radio antennas need to operate over several bands which are widely separated from each other. This can often be accomplished simply by connecting resonant elements for the different bands in parallel. Most of the transmitter's power will flow into the resonant element while the others present a high (reactive) impedance and draw little current from the same voltage. A popular solution uses so-called ''traps'' consisting of parallel resonant circuits which are strategically placed in breaks along each antenna element. When used at one particular frequency band the trap presents a very high impedance (parallel resonance) effectively truncating the element at that length, making it a proper resonant antenna. At a lower frequency the trap allows the full length of the element to be employed, albeit with a shifted resonant frequency due to the inclusion of the trap's net reactance at that lower frequency.
| |
| | |
| The bandwidth characteristics of a resonant antenna element can be characterized according to its [[Q factor|Q]], just as one uses to characterize the sharpness of an [[LC circuit|L-C resonant circuit]]. However it is often assumed that there is an advantage in an antenna having a high [[Q factor|Q]]. After all, ''Q'' is short for "quality factor" and a low Q typically signifies excessive loss (due to unwanted resistance) in a resonant [[LC circuit|L-C circuit]]. However this understanding does not apply to resonant antennas where the resistance involved is the [[radiation resistance]], a desired quantity which removes energy from the resonant element in order to radiate it (the purpose of an antenna, after all!). The Q is a measure of the ratio of reactance to resistance, so with a fixed [[radiation resistance]] (an element's radiation resistance is almost independent of its diameter) a greater reactance off-resonance corresponds to the poorer bandwidth of a very thin conductor. The Q of such a narrowband antenna can be as high as 15. On the other hand a thick element presents less reactance at an off-resonant frequency, and consequently a Q as low as 5. These two antennas will perform equivalently at the resonant frequency, but the second antenna will perform over a bandwidth 3 times as wide as the "hi-Q" antenna consisting of a thin conductor.
| |
| | |
| === Gain ===
| |
| {{main|Antenna gain}}
| |
| [[Antenna gain|Gain]] is a parameter which measures the degree of directivity of the antenna's radiation pattern. A high-gain antenna will preferentially radiate in a particular direction. Specifically, the ''antenna gain'', or ''power gain'' of an antenna is defined as the ratio of the [[intensity (physics)|intensity]] (power per unit surface) radiated by the antenna in the direction of its maximum output, at an arbitrary distance, divided by the intensity radiated at the same distance by a hypothetical [[Isotropic radiator|isotropic antenna]].
| |
| | |
| The gain of an antenna is a passive phenomenon - power is not added by the antenna, but simply redistributed to provide more radiated power in a certain direction than would be transmitted by an isotropic antenna. An antenna designer must take into account the application for the antenna when determining the gain. High-gain antennas have the advantage of longer range and better signal quality, but must be aimed carefully in a particular direction. Low-gain antennas have shorter range, but the orientation of the antenna is relatively inconsequential. For example, a dish antenna on a spacecraft is a high-gain device that must be pointed at the planet to be effective, whereas a typical [[Wi-Fi]] antenna in a laptop computer is low-gain, and as long as the base station is within range, the antenna can be in any orientation in space. It makes sense to improve horizontal range at the expense of reception above or below the antenna.<ref>{{cite web
| |
| |url=http://networkbits.net/wireless-printing/wireless-network-antenna-guide/
| |
| |title=Guide to Wi-Fi Wireless Network Antenna Selection.
| |
| |publisher=NetworkBits.net
| |
| |accessdate=April 8, 2008
| |
| | archiveurl= http://web.archive.org/web/20080305182010/http://networkbits.net/wireless-printing/wireless-network-antenna-guide/| archivedate= 5 March 2008 <!--DASHBot-->| deadurl= no}}</ref>
| |
| | |
| In practice, the half-wave dipole is taken as a reference instead of the isotropic radiator. The gain is then given in '''dBd''' (decibels over '''d'''ipole):
| |
| :: NOTE: '''0 dBd = 2.15 dBi'''. It is vital in expressing gain values that the reference point be included. Failure to do so can lead to confusion and error.
| |
| | |
| === Effective area or aperture ===
| |
| {{main|Antenna effective area}}
| |
| The ''[[Antenna effective area|effective area]]'' or effective aperture of a receiving antenna expresses the portion of the power of a passing electromagnetic wave which it delivers to its terminals, expressed in terms of an equivalent area. For instance, if a radio wave passing a given location has a flux of 1 pW / m<sup>2</sup> (10<sup>−12</sup> watts per square meter) and an antenna has an effective area of 12 m<sup>2</sup>, then the antenna would deliver 12 pW of [[radio frequency|RF]] power to the receiver (30 microvolts [[root mean square|rms]] at 75 ohms). Since the receiving antenna is not equally sensitive to signals received from all directions, the effective area is a function of the direction to the source.
| |
| | |
| Due to [[Reciprocity (electromagnetism)|reciprocity]] (discussed above) the gain of an antenna used for transmitting must be proportional to its effective area when used for receiving. Consider an antenna with no [[Copper loss|loss]], that is, one whose [[antenna efficiency|electrical efficiency]] is 100%. It can be shown that its effective area averaged over all directions must be equal to λ<sup>2</sup>/4π, the wavelength squared divided by 4π. Gain is defined such that the average gain over all directions for an antenna with 100% [[antenna efficiency|electrical efficiency]] is equal to 1. Therefore the effective area A<sub>eff</sub> in terms of the gain G in a given direction is given by:
| |
| :<math>A_{eff} = {\lambda^2 \over 4 \pi} \, G </math>
| |
| | |
| For an antenna with an [[antenna efficiency|efficiency]] of less than 100%, both the effective area and gain are reduced by that same amount. Therefore the above relationship between gain and effective area still holds. These are thus two different ways of expressing the same quantity. A<sub>eff</sub> is especially convenient when computing the power that would be received by an antenna of a specified gain, as illustrated by the above example.
| |
| | |
| === Radiation pattern ===
| |
| {{main|Radiation pattern}}
| |
| [[Image:Sidelobes en.svg|thumb|Polar plots of the horizontal cross sections of a (virtual) Yagi-Uda-antenna. Outline connects points with 3db field power compared to an ISO emitter.]]
| |
| The [[radiation pattern]] of an antenna is a plot of the relative field strength of the radio waves emitted by the antenna at different angles. It is typically represented by a three dimensional graph, or polar plots of the horizontal and vertical cross sections. The pattern of an ideal [[Isotropic radiator|isotropic antenna]], which radiates equally in all directions, would look like a [[sphere]]. Many nondirectional antennas, such as [[monopole antenna|monopoles]] and [[dipole antenna|dipoles]], emit equal power in all horizontal directions, with the power dropping off at higher and lower angles; this is called an [[Omnidirectional antenna|omnidirectional pattern]] and when plotted looks like a [[torus]] or donut.
| |
| | |
| The radiation of many antennas shows a pattern of maxima or "''lobes''" at various angles, separated by "''[[Null (radio)|null]]s''", angles where the radiation falls to zero. This is because the radio waves emitted by different parts of the antenna typically [[Interference (wave propagation)|interfere]], causing maxima at angles where the radio waves arrive at distant points [[in phase]], and zero radiation at other angles where the radio waves arrive [[out of phase]]. In a [[directional antenna]] designed to project radio waves in a particular direction, the lobe in that direction is designed larger than the others and is called the "''main lobe''". The other lobes usually represent unwanted radiation and are called "''[[sidelobe]]s''". The axis through the main lobe is called the "''principal axis''" or "''[[Antenna boresight|boresight]] axis''".
| |
| | |
| ===Field regions===
| |
| The space surrounding an antenna can be divided into three concentric regions: the reactive near-field, the radiating near-field (Fresnell region) and the far-field (Fraunhofer) regions. These regions are useful to identify the field structure in each, although there are no precise boundaries.
| |
| | |
| In the far-field region, we are far enough from the antenna to neglect its size and shape. We can assume that the electromagnetic wave is purely a radiating plane wave (electric and magnetic fields are in phase and perpendicular to each other and to the direction of propagation). This simplifies the mathematical analysis of the radiated field.
| |
| | |
| ===Impedance===
| |
| As an electro-magnetic wave travels through the different parts of the antenna system (radio, feed line, antenna, free space) it may encounter differences in impedance (E/H, V/I, etc.). At each interface, depending on the impedance match, some fraction of the wave's energy will reflect back to the source,<ref>Impedance is caused by the same physics as [[refractive index]] in optics, although impedance effects are typically one dimensional, where effects of refractive index is three dimensional.</ref> forming a standing wave in the feed line. The ratio of maximum power to minimum power in the wave can be measured and is called the [[standing wave ratio]] ('''SWR'''). A SWR of 1:1 is ideal. A SWR of 1.5:1 is considered to be marginally acceptable in low power applications where power loss is more critical, although an SWR as high as 6:1 may still be usable with the right equipment. Minimizing impedance differences at each interface ([[impedance matching]]) will reduce SWR and maximize power transfer through each part of the antenna system.
| |
| | |
| [[Complex number|Complex]] impedance of an antenna is related to the [[electrical length (antenna)|electrical length]] of the antenna at the wavelength in use. The impedance of an antenna can be matched to the feed line and radio by adjusting the impedance of the feed line, using the feed line as an impedance [[transformer]]. More commonly, the impedance is adjusted at the load (see below) with an [[antenna tuner]], a [[balun]], a matching transformer, matching networks composed of [[inductor]]s and [[capacitor]]s, or matching sections such as the gamma match.
| |
| | |
| ===Efficiency===
| |
| {{main|Antenna efficiency}}
| |
| ''[[Electrical efficiency|Efficiency]]'' of a transmitting antenna is the ratio of power actually radiated (in all directions) to the power absorbed by the antenna terminals. The power supplied to the antenna terminals which is not radiated is converted into heat. This is usually through [[Copper loss|loss resistance]] in the antenna's conductors, but can also be due to dielectric or magnetic core losses in antennas (or antenna systems) using such components. Such loss effectively robs power from the transmitter, requiring a stronger transmitter in order to transmit a signal of a given strength.
| |
| | |
| For instance, if a transmitter delivers 100 W into an antenna having an efficiency of 80%, then the antenna will radiate 80 W as radio waves and produce 20 W of heat. In order to radiate 100 W of power, one would need to use a transmitter capable of supplying 125 W to the antenna. Note that antenna efficiency is a separate issue from [[impedance matching]], which may also reduce the amount of power radiated using a given transmitter. If an [[standing wave ratio|SWR]] meter reads 150 W of incident power and 50 W of reflected power, that means that 100 W have actually been absorbed by the antenna (ignoring transmission line losses). How much of that power has actually been radiated cannot be directly determined through electrical measurements at (or before) the antenna terminals, but would require (for instance) careful measurement of [[field strength]]. Fortunately the loss resistance of antenna conductors such as aluminum rods can be calculated and the efficiency of an antenna using such materials predicted.
| |
| | |
| However [[Copper loss|loss resistance]] will generally affect the feedpoint impedance, adding to its resistive (real) component. That resistance will consist of the sum of the [[radiation resistance]] R<sub>r</sub> and the loss resistance R<sub>loss</sub>. If an [[root mean square|rms]] current I is delivered to the terminals of an antenna, then a power of I<sup>2</sup>R<sub>r</sub> will be radiated and a power of I<sup>2</sup>R<sub>loss</sub> will be lost as heat. Therefore the efficiency of an antenna is equal to R<sub>r</sub> / (R<sub>r</sub> + R<sub>loss</sub>). Of course only the total resistance R<sub>r</sub> + R<sub>loss</sub> can be directly measured.
| |
| | |
| According to [[Reciprocity (electromagnetism)|reciprocity]], the efficiency of an antenna used as a receiving antenna is identical to the efficiency as defined above. The power that an antenna will deliver to a receiver (with a proper [[impedance match]]) is reduced by the same amount. In some receiving applications, the very inefficient antennas may have little impact on performance. At low frequencies, for example, atmospheric or man-made noise can mask antenna inefficiency. For example, CCIR Rep. 258-3 indicates man-made noise in a residential setting at 40 MHz is about 28 dB above the thermal noise floor. Consequently, an antenna with a 20 dB loss (due to inefficiency) would have little impact on system noise performance. The loss within the antenna will affect the intended signal and the noise/interference identically, leading to no reduction in signal to noise ratio (SNR).
| |
| | |
| This is fortunate, since antennas at lower frequencies which are not rather large (a good fraction of a wavelength in size) are inevitably inefficient (due to the small radiation resistance R<sub>r</sub> of small antennas). Most AM broadcast radios (except for car radios) take advantage of this principle by including a small [[loop antenna#AM broadcast receiver loop antennas|loop antenna]] for reception which has an extremely poor efficiency. Using such an inefficient antenna at this low frequency (530–1650 kHz) thus has little effect on the receiver's net performance, but simply requires greater amplification by the receiver's electronics. Contrast this tiny component to the massive and very tall towers used at AM broadcast stations for transmitting at the very same frequency, where every percentage point of reduced antenna efficiency entails a substantial cost.
| |
| | |
| The definition of [[antenna gain]] or ''power gain'' already includes the effect of the antenna's efficiency. Therefore if one is trying to radiate a signal toward a receiver using a transmitter of a given power, one need only compare the gain of various antennas rather than considering the efficiency as well. This is likewise true for a receiving antenna at very high (especially microwave) frequencies, where the point is to receive a signal which is strong compared to the receiver's noise temperature. However in the case of a directional antenna used for receiving signals with the intention of ''rejecting'' interference from different directions, one is no longer concerned with the antenna efficiency, as discussed above. In this case, rather than quoting the [[antenna gain]], one would be more concerned with the ''directive gain'' which does ''not'' include the effect of antenna (in)efficiency. The directive gain of an antenna can be computed from the published gain divided by the antenna's efficiency.
| |
| | |
| ===Polarization===
| |
| {{main|Polarization (waves)}}
| |
| | |
| The ''[[polarization (waves)|polarization]]'' of an antenna refers to the orientation of the electric field ([[E-plane]]) of the radio wave with respect to the Earth's surface and is determined by the physical structure of the antenna and by its orientation; note that this designation is totally distinct from the antenna's directionality. Thus, a simple straight wire antenna will have one polarization when mounted vertically, and a different polarization when mounted horizontally. As a [[transverse wave]], the magnetic field of a radio wave is at right angles to that of the electric field, but by convention, talk of an antenna's "polarization" is understood to refer to the direction of the electric field.
| |
| | |
| Reflections generally affect polarization. For radio waves, one important reflector is the [[ionosphere]] which can change the wave's polarization. Thus for signals received following reflection by the ionosphere (a [[skywave]]), a consistent polarization cannot be expected. For [[line-of-sight propagation|line-of-sight communications]] or [[ground wave]] propagation, horizontally or vertically polarized transmissions generally remain in the about the same polarization state at the receiving location. Matching the receiving antenna's polarization to that of the transmitter can make a very substantial difference in received signal strength.
| |
| | |
| Polarization is predictable from an antenna's geometry, although in some cases it is not at all obvious (such as for the [[quad antenna]]). An antenna's linear polarization is generally along the direction (as viewed from the receiving location) of the antenna's currents when such a direction can be defined. For instance, a vertical [[whip antenna]] or [[WiFi]] antenna vertically oriented will transmit and receive in the vertical polarization. Antennas with horizontal elements, such as most rooftop TV antennas, are horizontally polarized (broadcast TV usually uses horizontal polarization). Even when the antenna system has a vertical orientation, such as an [[Antenna array (electromagnetic)|array]] of horizontal dipole antennas, the polarization is in the horizontal direction corresponding to the current flow. The polarization of a commercial antenna is an essential specification.
| |
| | |
| Polarization is the sum of the E-plane orientations over time projected onto an imaginary plane perpendicular to the direction of motion of the radio wave. In the most general case, polarization is [[ellipse|elliptical]], meaning that the polarization of the radio waves varies over time. Two special cases are [[linear polarization]] (the ellipse collapses into a line) as we have discussed above, and [[circular polarization]] (in which the two axes of the ellipse are equal). In linear polarization the electric field of the radio wave oscillates back and forth along one direction; this can be affected by the mounting of the antenna but usually the desired direction is either horizontal or vertical polarization. In circular polarization, the electric field (and magnetic field) of the radio wave rotates at the radio frequency circularly around the axis of propagation. Circular or elliptically polarized radio waves are [[Circular polarization#Left/right handedness conventions|designated as right-handed or left-handed]] using the "thumb in the direction of the propagation" rule. Note that for circular polarization, optical researchers use the opposite [[right hand rule]] from the one used by radio engineers.
| |
| | |
| It is best for the receiving antenna to match the polarization of the transmitted wave for optimum reception. Intermediate matchings will lose some signal strength, but not as much as a complete mismatch. A circularly polarized antenna can be used to equally well match vertical or horizontal linear polarizations. Transmission from a circularly polarized antenna received by a linearly polarized antenna (or vice versa) entails a 3dB reduction in [[signal-to-noise ratio]] as the received power has thereby been cut in half.
| |
| | |
| ===Impedance matching===
| |
| {{main|Impedance matching}}
| |
| Maximum power transfer requires matching the impedance of an antenna system (as seen looking into the transmission line) to the [[complex conjugate]] of the impedance of the receiver or transmitter. In the case of a transmitter, however, the desired matching impedance might not correspond to the dynamic output impedance of the transmitter as analyzed as a [[Thevenin's theorem|source impedance]] but rather the design value (typically 50 ohms) required for efficient and safe operation of the transmitting circuitry. The intended impedance is normally resistive but a transmitter (and some receivers) may have additional adjustments to cancel a certain amount of reactance in order to "tweak" the match. When a transmission line is used in between the antenna and the transmitter (or receiver) one generally would like an antenna system whose impedance is resistive and near the [[characteristic impedance]] of that transmission line in order to minimize the [[standing wave ratio]] (SWR) and the increase in transmission line losses it entails, in addition to supplying a good match at the transmitter or receiver itself.
| |
| | |
| Antenna tuning generally refers to cancellation of any reactance seen at the antenna terminals, leaving only a resistive impedance which might or might not be exactly the desired impedance (that of the transmission line). Although an antenna may be designed to have a purely resistive feedpoint impedance (such as a dipole 97% of a half wavelength long) this might not be exactly true at the frequency that it is eventually used at. In some cases the physical length of the antenna can be "trimmed" to obtain a pure resistance. On the other hand, the addition of a series inductance or parallel capacitance can be used to cancel a residual capacitative or inductive reactance, respectively.
| |
| | |
| In some cases this is done in a more extreme manner, not simply to cancel a small amount of residual reactance, but to resonate an antenna whose resonance frequency is quite different than the intended frequency of operation. For instance, a "whip antenna" can be made significantly shorter than 1/4 wavelength long, for practical reasons, and then resonated using a so-called [[loading coil#Radio antenna|loading coil]]. This physically large inductor at the base of the antenna has an inductive reactance which is the opposite of the capacitative reactance that such a vertical antenna has at the desired operating frequency. The result is a pure resistance seen at feedpoint of the loading coil; unfortunately that resistance is somewhat lower than would be desired to match commercial [[coaxial cable|coax]]{{Citation needed|date=June 2011}}.
| |
| | |
| So an additional problem beyond canceling the unwanted reactance is of matching the remaining resistive impedance to the [[characteristic impedance]] of the transmission line. In principle this can always be done with a transformer, however the turns ratio of a transformer is not adjustable. A general matching network with at least two adjustments can be made to correct both components of impedance. Matching networks using discrete inductors and capacitors will have losses associated with those components, and will have power restrictions when used for transmitting. Avoiding these difficulties, commercial antennas are generally designed with fixed matching elements or feeding strategies to get an approximate match to standard coax, such as 50 or 75 Ohms. Antennas based on the dipole (rather than vertical antennas) should include a [[balun]] in between the transmission line and antenna element, which may be integrated into any such matching network.
| |
| | |
| Another extreme case of impedance matching occurs when using a small [[loop antenna]] (usually, but not always, for receiving) at a relatively low frequency where it appears almost as a pure inductor. Resonating such an inductor with a capacitor at the frequency of operation not only cancels the reactance but greatly magnifies the very small [[radiation resistance]] of such a loop{{Citation needed|date=June 2011}}. This is implemented in most AM broadcast receivers, with a small ferrite loop antenna resonated by a capacitor which is varied along with the receiver tuning in order to maintain resonance over the AM broadcast band
| |
| | |
| ==Basic antenna models==
| |
| | |
| {{Unreferenced section|date=January 2014}}
| |
| | |
| [[File:TVAerial.jpg|thumb|right|Typical US multiband [[TV antenna]] (aerial)]]
| |
| There are many variations of antennas. Below are a few basic models. More can be found in [[:Category:Radio frequency antenna types]].<!-- Please don't add more models, write an article and put it in the category instead. -->
| |
| * The [[isotropic radiator]] is a purely theoretical antenna that radiates equally in all directions. It is considered to be a point in space with no dimensions and no mass. This antenna cannot physically exist, but is useful as a theoretical model for comparison with all other antennas. Most antennas' gains are measured with reference to an isotropic radiator, and are rated in dBi (decibels with respect to an isotropic radiator).
| |
| * The [[dipole antenna]] is simply two wires pointed in opposite directions arranged either horizontally or vertically, with one end of each wire connected to the radio and the other end hanging free in space. Since this is the simplest practical antenna, it is also used as a [[reference antenna|reference model]] for other antennas; gain with respect to a dipole is labeled as dBd. Generally, the dipole is considered to be [[omnidirectional antenna|omnidirectional]] in the plane perpendicular to the axis of the antenna, but it has deep [[null (radio)|null]]s in the directions of the axis. Variations of the dipole include the folded dipole, the half wave antenna, the ground plane antenna, the [[whip antenna|whip]], and the [[J-pole]].
| |
| * The [[Yagi-Uda antenna]] is a directional variation of the dipole with [[passive radiator|parasitic elements]] added which are functionality similar to adding a reflector and lenses (directors) to focus a filament light bulb.
| |
| * The [[random wire antenna]] is simply a very long (at least one quarter wavelength{{citation needed|date=February 2011}}) wire with one end connected to the radio and the other in free space, arranged in any way most convenient for the space available. Folding will reduce effectiveness and make theoretical analysis extremely difficult. (The added length helps more than the folding typically hurts.) Typically, a random wire antenna will also require an [[antenna tuner]], as it might have a random impedance that varies non-linearly with frequency.
| |
| * The [[horn antenna]] is used where high gain is needed, the wavelength is short ([[microwave]]) and space is not an issue. Horns can be narrow band or wide band, depending on their shape. A horn can be built for any frequency, but horns for lower frequencies are typically impractical. Horns are also frequently used as [[reference antenna]]s.
| |
| * The [[parabolic antenna]] consists of an active element at the focus of a [[parabolic reflector]] to reflect the waves into a plane wave. Like the horn it is used for high gain, microwave applications, such as [[satellite dish]]es.
| |
| * The [[patch antenna]] consists mainly of a square conductor mounted over a groundplane. Another example of a planar antenna is the tapered slot antenna (TSA), as the [[Vivaldi-antenna]].
| |
| | |
| <!-- Please don't add more models, write an article and put it in the category instead. -->
| |
| | |
| ==Practical antennas==
| |
| | |
| {{Unreferenced section|date=January 2014}}
| |
| | |
| [[File:Old rabbit ears.jpg|thumb|right|200px|"Rabbit ears" set-top antenna]]
| |
| Although any circuit can radiate if driven with a signal of high enough frequency, most practical antennas are specially designed to radiate efficiently at a particular frequency. An example of an inefficient antenna is the simple Hertzian [[dipole antenna]], which radiates over a wide range of frequencies and is useful {{citation needed|date=February 2011}} for its small size. A more efficient variation of this is the half-wave dipole, which radiates with high efficiency when the signal wavelength is twice the [[electrical length (antenna)|electrical length]] of the antenna.
| |
| | |
| One of the goals of antenna design is to minimize the [[Electrical reactance|reactance]] of the device so that it appears as a [[resistive]] load. An "antenna inherent reactance" includes not only the distributed reactance of the active antenna but also the natural reactance due to its location and surroundings (as for example, the capacity relation inherent in the position of the active antenna relative to ground). Reactance can be eliminated by operating the antenna at its [[resonant frequency]], when its capacitive and inductive reactances are equal and opposite, resulting in a net zero reactive current. If this is not possible, compensating inductors or capacitors can instead be added to the antenna to cancel its reactance as far as the source is concerned.
| |
| | |
| Once the reactance has been eliminated, what remains is a pure resistance, which is the sum of two parts: the ohmic resistance of the conductors, and the [[radiation resistance]]. Power absorbed by the ohmic resistance becomes waste heat, and that absorbed by the radiation resistance becomes radiated electromagnetic energy. The greater the ratio of radiation resistance to ohmic resistance, the more efficient the antenna.
| |
| | |
| == Effect of ground ==
| |
| {{main|Multipath propagation}}
| |
| | |
| {{Unreferenced section|date=January 2014}}
| |
| | |
| Antennas are typically used in an environment where other objects are present that may have an effect on their performance. Height above ground has a very significant effect on the radiation pattern of some antenna types.
| |
| | |
| At frequencies used in antennas, the ground behaves mainly as a [[dielectric]]. The conductivity of ground at these frequencies is negligible. When an electromagnetic wave arrives at the surface of an object, two waves are created: one enters the dielectric and the other is reflected. If the object is a conductor, the transmitted wave is negligible and the reflected wave has almost the same amplitude as the incident one. When the object is a dielectric, the fraction reflected depends (among other things) on the [[angle of incidence]]. When the angle of incidence is small (that is, the wave arrives almost perpendicularly) most of the energy traverses the surface and very little is reflected. When the angle of incidence is near 90° (grazing incidence) almost all the wave is reflected.
| |
| | |
| Most of the electromagnetic waves emitted by an antenna to the ground below the antenna at moderate (say < 60°) angles of incidence enter the earth and are absorbed (lost). But waves emitted to the ground at grazing angles, far from the antenna, are almost totally reflected. At grazing angles, the ground behaves as a mirror. Quality of reflection depends on the nature of the surface. When the irregularities of the surface are smaller than the wavelength, reflection is good.
| |
| | |
| [[File:A6-1EN.jpg|right|frame|The wave reflected by earth can be considered as emitted by the image antenna.]]
| |
| This means that the receptor "sees" the real antenna and, under the ground, the image of the antenna reflected by the ground. If the ground has irregularities, the image will appear fuzzy.
| |
| | |
| If the receiver is placed at some height above the ground, waves reflected by ground will travel a little longer distance to arrive to the receiver than direct waves. The distance will be the same only if the receiver is close to ground.
| |
| | |
| In the drawing at right, the angle has been drawn <math>\scriptstyle{\theta}</math> far bigger than in reality. The distance between the antenna and its image is <math>\scriptstyle{d}</math>.
| |
| | |
| The situation is a bit more complex because the reflection of electromagnetic waves depends on the [[polarization (waves)|polarization]] of the incident wave. As the [[refractive index]] of the ground (average value <math>\scriptstyle{\simeq 2}</math>) is bigger than the refractive index of the air (<math>\scriptstyle{\simeq 1}</math>), the direction of the component of the electric field parallel to the ground inverses at the reflection. This is equivalent to a phase shift of <math>\scriptstyle{\pi}</math> radians or 180°. The vertical component of the electric field reflects without changing direction. This sign inversion of the parallel component and the non-inversion of the perpendicular component would also happen if the ground were a good electrical conductor.
| |
| | |
| [[File:A6-2.jpg|right|frame| The vertical component of the current reflects without changing sign. The horizontal component reverses sign at reflection.]]
| |
| This means that a receiving antenna "sees" the image antenna with the current in the same direction if the antenna is vertical or with the current inverted if the antenna is horizontal.
| |
| | |
| For a vertical [[Polarization (waves)|polarized]] emission antenna the far electric field of the electromagnetic wave produced by the direct ray plus the reflected ray is:
| |
| | |
| ::<math>\textstyle{\left|E_\perp\right|=2\left|E_{\theta_1}\right|\left|\cos\left({kd\over2}\sin\theta\right) \right|}</math>
| |
| | |
| The sign inversion for the parallel field case just changes a cosine to a sine:
| |
| | |
| ::<math>\textstyle{\left|E_{\|}\right|=2\left|E_{\theta_1}\right|
| |
| \left|\sin\left({kd\over2}\sin\theta\right) \right|}</math>
| |
| | |
| In these two equations:
| |
| * <math>\scriptstyle{E_{\theta_1}}</math> is the electrical field radiated by the antenna if there were no ground.
| |
| * <math>\scriptstyle{k={2\pi\over\lambda}}</math> is the [[wave number]].
| |
| * <math>\scriptstyle{\lambda}</math> is the [[wave length]].
| |
| * <math>\scriptstyle{d}</math> is the distance between antenna and its image (twice the height of the center of the antenna).
| |
| | |
| [[File:A6-4.jpg|right|frame|Radiation patterns of antennas and their images reflected by the ground. At left the polarization is vertical and there is always a maximum for <math>\scriptstyle{\theta=0}</math>. If the polarization is horizontal as at right, there is always a zero for <math>\scriptstyle{\theta=0}</math>.]]
| |
| | |
| For emitting and receiving antennas situated near the ground (in a building or on a mast) far from each other, distances traveled by direct and reflected rays are nearly the same. There is no induced phase shift. If the emission is polarized vertically, the two fields (direct and reflected) add and there is maximum of received signal. If the emission is polarized horizontally, the two signals subtract and the received signal is minimum. This is depicted in the image at right. In the case of vertical polarization, there is always a maximum at earth level (left pattern). For horizontal polarization, there is always a minimum at earth level. Note that in these drawings the ground is considered as a perfect mirror, even for low angles of incidence. In these drawings, the distance between the antenna and its image is just a few wavelengths. For greater distances, the number of lobes increases.
| |
| | |
| Note that the situation is different—and more complex—if reflections in the ionosphere occur. This happens over very long distances (thousands of kilometers). There is not a direct ray but several reflected rays that add with different phase shifts.
| |
| | |
| This is the reason why almost all public address radio emissions have vertical polarization. As public users are near ground, horizontal polarized emissions would be poorly received. Observe household and automobile radio receivers. They all have vertical antennas or horizontal [[ferrite antennas]] for vertical polarized emissions. In cases where the receiving antenna must work in any position, as in [[mobile phone]]s, the emitter and receivers in [[base stations]] use [[circular polarization|circular polarized]] electromagnetic waves.
| |
| | |
| Classical (analog) television emissions are an exception. They are almost always horizontally polarized, because the presence of buildings makes it unlikely that a good emitter antenna image will appear{{citation needed|date=February 2011}}. However, these same buildings reflect the electromagnetic waves and can create [[ghosting (television)|ghost images]]. Using horizontal polarization, reflections are attenuated because of the low reflection of electromagnetic waves whose magnetic field is parallel to the dielectric surface near the [[Brewster's angle]]. Vertically polarized analog television has been used in some rural areas.
| |
| In [[digital terrestrial television]] reflections are less obtrusive, due to the inherent robustness of [[digital signal]]ling and built-in [[Error detection and correction|error correction]].
| |
| | |
| == Mutual impedance and interaction between antennas ==
| |
| | |
| Current circulating in one antenna generally induces a voltage across the feedpoint of nearby antennas or antenna elements; note that this now is a [[near-field region|near field]] phenomenon which is not properly accounted for using the [[Friis transmission equation]] for instance. It can be described using the concept of '''mutual impedance''' <math>\scriptstyle{Z_{21}}</math> between the two antennas just as the mutual impedance <math>\scriptstyle{j\omega M}</math> describes the voltage induced in one inductor by a current through a nearby coil [[coupled inductors|coupled]] to it through a [[mutual inductance]] ''M''. The mutual impedance <math>\scriptstyle{Z_{21}}</math> between two antennas is defined<ref>Principles of Antenna Theory, Kai Fong Lee, 1984, John Wiley and Sons Ltd., ISBN 0-471-90167-9</ref> as:
| |
| ::<math>Z_{21}={v_2\over i_1}</math>
| |
| where <math>\textstyle{i_{1}}</math> is the current flowing in antenna 1 and <math>\textstyle{v_2}</math> is the voltage induced at the open-circuited feedpoint of antenna 2 due only to <math>\textstyle{i_{1}}</math>. This parameter also permits, for instance, the calculation of the current in antenna 2 when its feedpoint is shorted or otherwise terminated, as we shall now show.
| |
| | |
| Using the above definition, the currents and voltages present at the feedpoints of a set of coupled antennas satisfy:
| |
| :<math>\begin{matrix} v_1&=&i_1Z_{11}&+&i_2Z_{12}&+& \cdots &+& i_nZ_{1n}\\
| |
| v_2&=&i_1Z_{21}&+& i_2Z_{22}&+&\cdots&+&i_nZ_{2n} \\
| |
| \vdots & & \vdots & & \vdots & & & & \vdots \\
| |
| v_n&=&i_1Z_{n1}&+&i_2Z_{n2}&+&\cdots&+&i_nZ_{nn}\end{matrix}
| |
| </math>
| |
| | |
| where:
| |
| * <math>\scriptstyle{v_i}</math> is the voltage at the terminals of antenna <math>i</math>
| |
| * <math>\scriptstyle{i_i}</math> is the current flowing between the terminals of antenna <math>i</math>
| |
| * <math>\scriptstyle{Z_{ii}}</math> is the driving point impedance of antenna <math>i</math>
| |
| * <math>\scriptstyle{Z_{ij}}</math> is the mutual impedance between antennas <math>i</math> and <math>j</math>.
| |
| [[File:Zij-en.png|center|frame|Mutual impedance between parallel <math>\scriptstyle{{\lambda \over 2}}</math> dipoles not staggered. Curves '''Re''' and '''Im''' are the resistive and reactive parts of the impedance.]]
| |
| | |
| As is the case for mutual inductances,
| |
| :<math>\scriptstyle{Z_{ij}\,= \,Z_{ji}}.</math>
| |
| This is a consequence of [[Lorentz reciprocity]]. For an antenna element <math>i</math> not connected to anything (open circuited) one can write <math>i_i=0</math>. But for an element <math>i</math> which is short circuited, a current is generated across that short but no voltage is allowed, so the corresponding <math>\textstyle{v_i}=0</math>. This is the case, for instance, with the so-called [[parasitic element]]s of a [[Yagi-Uda antenna#Analysis|Yagi-Uda antenna]] where the solid rod can be viewed as a dipole antenna shorted across its feedpoint. Parasitic elements are unpowered elements that absorb and reradiate RF energy according to the induced current calculated using such a system of equations.
| |
| | |
| With a particular geometry, it is possible for the mutual impedance between nearby antennas to be zero. This is the case, for instance, between the crossed dipoles used in the [[turnstile antenna]].
| |
| | |
| ==Antenna gallery==
| |
| | |
| ===Antennas and antenna arrays===
| |
| <gallery>
| |
| Image:Montreal-tower-top.thumb2.jpg|A [[Yagi antenna|Yagi-Uda beam antenna]].
| |
| Image:Antenna d44ac.jpg|A multi-band rotary directional antenna for amateur radio use.
| |
| Image:Television Antenna.jpg|[[Rooftop TV antenna]]. It is actually three [[Yagi antenna]]s. The longest elements are for the low band, while the medium and short elements are for the high and UHF band.
| |
| Image:Space diversity.gif|A terrestrial microwave radio antenna array.
| |
| Image:LadderlineW3NP.JPG|Wire [[dipole antenna]] using open-wire [[ladder line]] feedline for amateur radio use.
| |
| Image:Low cost DCF77 receiver.jpg|Low cost [[Low frequency|LF]] [[time signal]] receiver, antenna (left) and receiver
| |
| File:136 to 174 MHz base station antennas.jpg|Examples of US 136-174 MHz base station antennas.
| |
| Image:VHF UHF LP-antenna.JPG|Rotatable log-periodic array for VHF and UHF.
| |
| Image:Delano VOA.jpg|Shortwave antennas in [[Delano, California]].
| |
| Image:OldTVAntenna.JPG|An old VHF-band Yagi-type television antenna.
| |
| Image:T2FD Antenna.png|A [[T2FD Antenna|T2FD]] broadband antenna, covering the 5-30 MHz band.
| |
| File:Aerial antenna.JPG|A US multiband "aerial" [[TV antenna]].
| |
| File:Old rabbit ears.jpg|"[[Television antenna|Rabbit ears]]" antenna
| |
| File:Philco am loop.jpg|AM [[loop antenna]]
| |
| </gallery>
| |
| | |
| ===Antennas and supporting structures===
| |
| <gallery>
| |
| Image:Doncastertower.JPG|A building rooftop supporting numerous dish and sectored mobile telecommunications antennas ([[Doncaster, Victoria|Doncaster]], [[Victoria (Australia)|Victoria]], [[Australia]]).
| |
| File:Palmerston-water-tank.jpg|A [[water tower]] in [[Palmerston, Northern Territory|Palmerston]], [[Northern Territory]] with radio broadcasting and communications antennas.
| |
| Image:base station mexico-city.JPG|A three-sector telephone site in Mexico City.
| |
| Image:PalmCellTower.jpg|Telephone site concealed as a palm tree.
| |
| </gallery>
| |
| | |
| ===Diagrams as part of a system===
| |
| <gallery>
| |
| Image:Trunked 5ch central control.svg|Antennas may be connected through a [[multiplexing]] arrangement in some applications like this [[Trunked radio system|trunked]] [[two-way radio]] example.
| |
| Image:Base station antenna network.svg|Antenna network for an emergency medical services base station.
| |
| </gallery>
| |
| | |
| ==See also==
| |
| {{portal|Radio}}
| |
| {{commons category|Antennas}}
| |
| * [[Amateur radio]]
| |
| * [[Antenna measurement]]
| |
| * [[AWX antenna]]
| |
| * [[:Category:Radio frequency antenna types]]
| |
| * [[:Category:Radio frequency propagation]]
| |
| * [[Cellular repeater]]
| |
| * [[DXing]]
| |
| * [[Electromagnetism]]
| |
| * [[Fractal antenna]]
| |
| * [[Mast radiator]]
| |
| * [[Mobile modem]]
| |
| * [[Numerical Electromagnetics Code]]
| |
| * [[Radio masts and towers]]
| |
| * [[Radio telescope]]
| |
| * [[RF connector]]
| |
| * [[Satellite television]]
| |
| * [[Smart antenna]]
| |
| * [[Television antenna]]
| |
| * [[Terrestrial Trunked Radio|TETRA]]
| |
| * [[Whip antenna]]
| |
| | |
| == Notes ==
| |
| {{reflist}}
| |
| | |
| ==References==
| |
| | |
| ===General references===
| |
| * Antenna Theory (3rd edition), by C. Balanis, Wiley, 2005, ISBN 0-471-66782-X;
| |
| * Antenna Theory and Design (2nd edition), by W. Stutzman and G. Thiele, Wiley, 1997, ISBN 0-471-02590-9;
| |
| * Antennas (3rd edition), by J. Kraus and R. Marhefka, McGraw-Hill, 2001, ISBN 0-07-232103-2;
| |
| * Antennenbuch, by [[Karl Rothammel]], publ. Franck'sche Verlagshandlung Stuttgart, 1991, ISBN 3-440-05853-0; [http://www.worldcat.org/oclc/65969707?tab=editions other editions] (in German)
| |
| * [http://www1.i2r.a-star.edu.sg/~chenzn Antennas for portable Devices], Zhi Ning Chen (edited), John Wiley & Sons in March 2007
| |
| * Broadband Planar Antennas: Design and Applications, Zhi Ning Chen and M. Y. W. Chia, John Wiley & Sons in February 2006
| |
| * The ARRL Antenna Book (15th edition), ARRL, 1988, ISBN 0-87259-206-5
| |
| | |
| ==="Practical antenna" references===
| |
| * [http://www.aerialsandtv.com/aerial%20positioningtests.html UHF aerial positioning tests]
| |
| * [http://www.antenna-theory.com ''Antenna Theory'' antenna-theory.com]
| |
| * [http://www.dxzone.com/catalog/Antennas/ ''Antennas'' Antenna types]
| |
| * [http://www.emtalk.com/mwt_mpa.htm ''Patch Antenna: From Simulation to Realization'' EM Talk]
| |
| * [http://www.arrl.org/files/file/QEX%20Binaries/0105downs.pdf ''Why Antennas Radiate'', Stuart G. Downs, WY6EE] (PDF)
| |
| * [http://www.classictesla.com/download/emfields.pdf ''Understanding electromagnetic fields and antenna radiation takes (almost) no math'', Ron Schmitt, EDN Magazine, March 2 2000] (PDF)
| |
| * [http://www.aerialsandtv.com/fmanddabradio.html#FMandDABaerialTests Tests of FM/VHF receiving antennas.]
| |
| * http://www.tvantennasperth.com.au/Diyantennas.html :"Antenna Gain"
| |
| *[http://www.ilmondodelletelecomunicazioni.it/english/antennas/index.htm Antennas: Generalities, Principle of operation, As electronic component, Hertz Marconi and Other types Antennas etc etc]
| |
| | |
| ===Theory and simulations===
| |
| * AN-SOF, "[http://www.antennasoftware.com.ar/1_5_PRODUCTS.html Antenna Simulation Software]". Program system for the modeling of antennas and scatterers.
| |
| *http://www.dipoleanimator.com
| |
| * EM Talk, "[http://www.emtalk.com/tut_1.htm Microstrip Patch Antenna]", (Theory and simulation of microstrip patch antenna)
| |
| * "[http://www.jampro.com/index.php?page=technical-documents-and-calculators Online Calculations and Conversions ]" Formulas for simulating and optimizing Antenna specs and placement
| |
| * "[http://www.q-par.com/capabilities/software/microwave-antenna-design-calculator Microwave Antenna Design Calculator]" Provides quick estimation of antenna size required for a given gain and frequency. 3 dB and 10 dB beamwidths are also derived; the calculator additionally gives the far-field range required for a given antenna.
| |
| * Sophocles J. Orfanidis, "[http://www.ece.rutgers.edu/~orfanidi/ewa/ Electromagnetic Waves and Antennas]", Rutgers University (20 PDF Chaps. Basic theory, definitions and reference)
| |
| * Hans Lohninger, "Learning by Simulations: Physics: [http://www.vias.org/simulations/simusoft_twoaerials.html Coupled Radiators]". vias.org, 2005. (ed. Interactive simulation of two coupled antennas)
| |
| *[http://www.ingenierias.ugto.mx/profesores/sledesma/documentos/index.htm NEC Lab] - NEC Lab is a tool that uses Numerical Electromagnetics Code and Artificial Intelligence to design and simulate antennas.
| |
| * Justin Smith "[http://www.aerialsandtv.com/aerials.html Aerials]". A.T.V (Aerials and Television), 2009. (ed. Article on the (basic) theory and use of FM, DAB & TV aerials)
| |
| * Antennas Research Group, "[http://www.antennas.gr Virtual (Reality) Antennas]". Democritus University of Thrace, 2005.
| |
| * "Support > Knowledgebase > RF Basics > Antennas / Cables > [http://www.maxstream.net/helpdesk/article-27 dBi vs. dBd detail]". MaxStream, Inc., 2005. (ed. How to measure antenna gain) (New location: http://www.digi.com/support/kbase/kbaseresultdetl?id=2146 Note: to skip the registration form click the link below it)
| |
| * [http://www.astrosurf.com/luxorion/qsl-antenna4.htm Yagis and Log Periodics, Astrosurf article.]
| |
| * Raines, J. K., "Virtual Outer Conductor for Linear Antennas," Microwave Journal, Vol. 52, No. 1, January, 2009, pp. 76–86
| |
| * [http://www.aerialsandtv.com/fmanddabradio.html#FMandDABaerialTests Tests of FM/VHF receiving antennas.]
| |
| | |
| ;Effect of ground references
| |
| * Electronic Radio and Engineering. F.E. Terman. McGraw-Hill
| |
| * Lectures on physics. Feynman, Leighton and Sands. Addison-Wesley
| |
| * Classical Electricity and Magnetism. W. Panofsky and M. Phillips. Addison-Wesley
| |
| | |
| ===Patents and USPTO===
| |
| * [http://www.uspto.gov/go/classification/uspc343/defs343.htm CLASS 343], Communication: Radio Wave Antenna
| |
| | |
| ==Further reading==
| |
| | |
| * Antennas for Base Stations in Wireless Communications, edited by Zhi Ning Chen and Kwai-Man Luk, McGraw-Hill Companies, Inc, USA in May 2009
| |
| {{Wiktionary-inline|antenna}}
| |
| | |
| {{Antenna Types}}
| |
| {{Analogue TV transmitter topics}}
| |
| {{Telecommunications}}
| |
| | |
| {{DEFAULTSORT:Antenna (Radio)}}
| |
| [[Category:Antennas (radio)| ]]
| |
| [[Category:Radio electronics]]
| |